This listing has been removed


We're sorry, but this listing is not available anymore. Here is a list of alternative listings.

Drawing Machine, Schumag


Availability: listing already sold

Listing description

Manufacturing Year: 2006
Aluminum Bar: 22mm - 60mm
Line Speed: 10~40m/min
Cutting Length: 2000~5000mm

-Drawing Machine:
Line max. speed: 40m/min
Motor rated speed: 750rpm(40m/min/ 727.625rpm)
Gear ratio: (1/29.105)/(25/40)=1/18.2

-Shear:
Car max. speed: 60m/min
Motor rated speed: 3000rpm(40m/min/ 1131.8rpm)
Gear ratio: 1/28.295
Gear traverse PLG: 1rev./35mm/1024p(29.2609p/1mm)

-Outlet table traverse roll:
Motor rated speed: 3000rpm
Roll diameter: 131.25mm
Gear ratio: 1/7.71
Line speed: 183.27m/min/3000rpm(40m/min /654.77rpm)

-End straightener traverse roll:
Motor rated speed: 1800rpm
Roll diameter: 198.85mm
Gear ratio: 1/26.921
Line speed: 41.75m/min/1800rpm(40m/min /1724.55rpm)

-Shear inlet traverse roll:
Motor rated speed: 3000rpm
Roll diameter: 131.25mm
Gear ratio: 1/7.71
Line speed: 183.27m/min/ 3000rpm(40m/min /654.77rpm)

-Shear outlet traverse roll:
Motor rated speed: 3000rpm
Roll diameter: 131.25mm
Gear ratio: 1/7.71
Line speed: 183.27m/min/ 3000rpm(40m/min /654.77rpm)

-Main motor:
Drawing+Roller straighter+Shearing cutter: 550 kW
Polishing: 150 kW
Pusher pointer: 150 kW
Total electric consumption: approx.. 1100kW

-Two Heads type Coil Stand
-Horizontal type Pre-Straightener
-Vertical type Pre-Straightener
-Horizontal type Pre-Straightener (left 4 roll, right 5 roll)
-Vertical type Pre-Straightener (top 3 roll, bottom 4 roll)
-Horizontal type Pre-Straightener (left 5 roll, right 4 roll)
-Vertical type Pre-Straightener (top 4 roll, bottom 5 roll)
-Push Pointer : power 800ton, stroke 400mm
-Drawing Machine Body
Motor, 356.25 kW, Inverter
N1: 0-1455 rpm
N2: 50 rpm
-Horizontal type Straightener (left 3 roll, right 4 roll)
-Vertical type Straightener (top 4 roll, bottom 3 roll)
-Send-off Pinch Roll
-Hydraulic type Shearing Cutting Machine
-Intermediate Pipe Receiver Table
-8 Nozzle type Polishing Machine (motor 150 kW)
-Pinch Roll for Distribution and Carry-out
-Carry-out Table
-Product Pool
-Reduction Gear
-Motors/Pipes
-Operation Panel(touch panel type)

This equipment was set to production of Alunimium products

This machine was comissioned in 2007 and stopped production in 2017.

This equipment is located in US


Please note that this description may have been translated automatically.

Availability: listing already sold

Listing information

Manufacturer Schumag
Model Drawing Machine
Year 2006
Country USA USA
Condition Good
Main category Metalworking Machinery
Subcategory Metalworking Lines
ID P30217023

Availability: listing already sold

About the seller

Client type Machinery dealer
On Kitmondo since 2015
Number of listings 0
Country USA USA
Employees 1 - 10
Established 2000
Last activity June 21, 2023