Drytac HGP260 Hot Press Heated Glass-Top Vacuum Press (35 x 47")

Listing description

Drytac HGP260 Hot Press Heated Glass-Top Vacuum Press (35 x 47")

Key Features

• Use with Photos, Prints, and More
• Automatic Electric Timer
• Manual Override Switch
• Uses Invisible Conductive Film
• Digital Thermostat
Use the HGP260 Hot Press Heated Glass-Top Vacuum Press with a wide range of presentation materials from foam board and wood to photos, art prints and delicate fabrics. Picture framers, photo labs, digital service bureaus and other finishing professionals prize this press for its ability to produce a very even spread of heat across the work surface and achieve a superior quality of surface finish. It features an automatic electronic timer with a manual override switch and vacuum pressure adjustment capabilities. Upon completion of the cycle, vacuum pressure is automatically released and the timer resets itself.
Drytac HGP260 Overview
Use the HGP260 Hot Press Heated Glass-Top Vacuum Press with a wide range of presentation materials from foam board and wood to photos, art prints and delicate fabrics. Picture framers, photo labs, digital service bureaus and other finishing professionals prize this press for its ability to produce a very even spread of heat across the work surface and achieve a superior quality of surface finish. It features an automatic electronic timer with a manual override switch and vacuum pressure adjustment capabilities. Upon completion of the cycle, vacuum pressure is automatically released and the timer resets itself.
The top panel of the heated glass top vacuum press is made up of two sheets of reinforced tempered glass. The inner surface of the lower sheet has an invisible conductive film embedded in it. A controlled electric current is passed through this conductive film creating a highly efficient heating system. A sensor on the glass monitors and controls the temperature by means of a digital thermostat. The glass is extremely smooth and scratch-resistant. The transparent top panel allows the operator to view materials during processing and correct miss-aligned work or folded back corners.

This equipment is located in US