Durma AD-R 2060 Press brake cnc/nc

Listing description

The DURMA AD-R 2060 press brake was built in Turkey by Durmazlar in 2011. The machine with a pressure of 60 t, enables bending of a sheet with a length of 2050 mm, at a speed of 10 mm / s - the run-on speed is 200 mm / s, and the return speed is 120 mm / s. The edge bending machine is equipped with: CNC CYBELEC DNC 880S control, manually controlled table deformation correction mechanism and a rear bumper with a drive. The total weight of the press is 5,850 kg. The machine is offered with accessories.

Technical parameters of the hydraulic press brake DURMA AD-R 2060

- pressing force: 60 t
- bending length: 2050 mm
- bending speed: 10 mm / s
- projection: 410 mm
- distance between columns: 1700 mm
- run-on speed: 200 mm / s
- return speed: 120 mm / s
- cylinder stroke: 265 mm
- boom stop time: 54 ms
- stopping distance: 10 mm
- engine power: 7.5 kW
- supply voltage / frequency: 400 V / 50 Hz
- dimensions (L x W x H): 3300 x 1650 x 2750 mm
- total weight of the AD-R 2060 press: 5850 kg

Accessories for the AD-R 2060 bending machine

- CNC control: CYBELEC DNC 880S
- 4 controlled axes (Y1, Y2, X, R)
- foot-hand controller
- stamp
- matrix
- x2 pin and die rotation chain
- lighting lamp
- manually controlled table deformation correction mechanism
- motorized rear bumper
- sheet metal supports with T-channel and buffers
- DTR - technical and start-up documentation

This equipment is located in PL