Durma HAP 2580 Press brake cnc/nc

Listing description

CNC hydraulic press brake DURMA HAP 2580 was built in Turkey by Durmazlar Makina Sanayi ve Ticaret A.S. in 2002. It is equipped with Cybelec DNC 80 numerical control, which enables programming of three axes. The machine has a pressing force of 80 t, allowing it to bend an object with a length of 2550 mm. The slider makes jumps of 160 mm. The outreach of the table is 350 mm and the distance between the columns is 2150 mm. The press has an oil tank with a capacity of 100 liters. It is also equipped with, among other things, die joining plates and an upper punch.

DURMA has 5 CNC controlled axes:
- deflection arrow compensation
- Y1 and Y2 axes (right and left actuator)
- bumper: front - rear and up - down

Equipment of the DURMA HAP 2580 hydraulic press brake
- CNC control: Cybelec DNC 80
- matrix
- upper stamp
- matrix connecting plate: 4 pieces
- matrix setting plate: 4 pieces
- die turning chain: 2 pieces
- front support: 2 pieces
- foot pedal
- side covers: 2 pieces
- rear covers: 4 pieces

Technical data of the CNC press brake DURMA HAP 2580

- pressure: 80 t
- bending length: 2550 mm
- distance between columns: 2150 mm
- stroke: 160 mm
- projection 350 mm
- engine power: 7.5 kW
- approach speed: 100 mm / s
- working speed: 8 mm / s
- return speed: 68 mm / s
- oil tank capacity: 100 l
- supply voltage: 380 V
- power supply: 25 A
- motor rated current: 15.5 A
- cross-section of power cables: 4 x 2.5 mm2
- minimum insulation resistance: 1 Mo
- test voltage: 1000 V
- control voltage: 24 V
- frequency: 50 Hz
- height: 2250 mm
- width: 2000 mm
- length: 3750 mm
- weight: approx. 5900 kg

This equipment is located in PL