Electrovert Electra 600/F Wave Solder

Listing description

The ELECTROVERT Electra is an advanced, highly flexible wave soldering system designed for high-volume manufacturers. The proven performance of the platform delivers world-class soldering results while providing lead-free processing capability.

The system is designed with closed-loop controls that provide accuracy and repeatability and an intuitive Windows operator interface that provides easy recipe set-up. Setup parameters can be entered while the operator views operations by sliding the control station along the front of the machine. VOC-Free fluxes are supported by the fluxer module and efficiently dried with the Vectaheat convection preheaters. The Electra is capable of handling lead-free applications with its cast iron solder pot and corrosive resistant components. A quick-change solder pot is available that allows the user to switch between different solder alloys, i.e. tin/lead to lead-free. The solder wave can be configured for air operation with the proven Lambda wave or for nitrogen operation. For easy maintenance, lift-up hoods and a fold-down tailgate provide full front access to the machine
Specifications
Process Width: 2" to 24" (50 mm to 609 mm) opt.
Machine Length: 150.5" (3823 mm)
Machine Length with External Fluxer: 175.5" (4458 mm)
Machine Width: 64.4" (1636 mm)
Machine Height: 72" (1829 mm)
Preheat Length: 6' (1.8 m) with internal fluxer
I/R Preheat: 3 top side
Vectaheat: 3 bottom side
Wave Rotary chip: standard
Conveyor Automatic Width: standard
Finger Cleaner: standard
Exhaust requirements: Three (3) 8" (208 mm) stacks: port 1 - 650 cfm; port 2 - 925 cfm; port 3 - 200 cfm
Air requirements: 60 to 120 psig (415 to 830 kPa)

This equipment is located in US