Listings similar to "Engel ES 200/45 HL-V" 60

used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Inj…

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 ba…

Brand Engel Model ES600H/200VRBW-EC100-A03 Year of Mfg 2001 Screw Diameter 55mm Shot Size 15.4 oz Platen Size 39.4" x 25.9…

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

Data sheet Brand: ENGEL Model: VICTORY 500/120 Tech Tonnage: 120 Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 C…

Engel DUO 11050/1100 injection molding machine Year of manufacture -2003 Closing force- 11000 kN Size of mold plates- 2000 x 1830 mm Distance…

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2006 Clamp Force (t): 90 Screw Diameter (mm): 35 Max Sh…

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

- Model ES2000/400, - 38.7 OZ, - Man. in 1997, cc90 controls, - 26" x 26" tie bar spacing, - 40" x 40" platens, - 57.5" max. daylight, - 60…

Clamping force 150 t Screw dia 50 mm Max. swept wolume 393 cm3 Injection rate 283 cm3/s Injection pressure 1439 bar Nozzle stroke 350 mm Worki…

Mould opening/closing, injection, ejection, etc. are fine and smooth. There is backflow as a problem. It is not known whether it is possible to r…

Machine: ENGEL VICTORY ECODRIVE 160T Year: 2011 Control type: CC200 Number of hours: 35,000 H Closing Closing force: 160T Opening stroke: 600…

Machine: ENGEL VICTORY ECODRIVE 160T BI MAT YEAR 2012 Year 2012 Control type: CC200 Number of hours: 43 372 H Closing Closing force: 160T Bet…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

ENGEL injection molding machine unit for sale. The unit is used for gas injection. The year of production of the device is 2006. We bought i…

Brand: ENGEL Model: DUO 1350/800 Tonnage: 800 Year: 2004 Clearence between tie-bars: 1170x1000 Screw diameter: 60 Calculated shot volume: 735 …

Brand Engel Model ES40TL Year of Mfg 2000 Shot Size 1.6 oz Platen Size 21.5" x 17" Clamp Style Hydraulic (Tiebarless) Controls EC100 Voltage 4…

Engel e-motion 310/100 electric machine screw: 30 mm FOR REPAIR Mat: polyamid, polypropylen 5,3x1,6x2,1 m, 10,8 ton

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Machine: ENGEL 100T E ELECTRIC MOTION YEAR 2011 Year: 2011 Control type: CC200 Number of hours: 32 718H Closing Closing force: 100T Opening s…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 106 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

INJECTION UNIT Screw diameter: mm Calculated injection volume: cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on the mate…

Engel Victory 750/150 Tech Injection weight: 354 g Closing force: 1,500 kN Screw diameter: 50 mm Injection pressure: 1427 (1909) bar Column spac…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Used 150 Ton Engel ES600/150 Hydraulic Injection Molding Machine Brand Engel Model ES600/150 Year of Mfg 1998 Barrel 40mm Shot Size 8.2 oz Quan…

Year: 2003 Operating hours: 56,891 h Screw: HVF 22 mm Injection pressure: 1890 bar Stroke volume: 123 ccm Clamping force: 60 t tie bar sp…