Erema Intarema 2021 T-Veplus Pelletizing Line

Listing description

Used Erema Intarema 2021 T-VEplus Pelletizing Line, nominal capacity range 2200-3500kg/hr depending on feed material, currently with 8410 run hours consisting of the following:
-FB_10000_1200_SH cleated feed conveyor, 1200mm(47") wide x 10000mm(393") long cleated inclined belt.
-DTF 1440/1200/600 pass thru over belt metal detector, 600mm(23.6") tall opening.
-Erema Intarema extruder, model I_2021_t_VEplus with ecoSave, 2000mm(78") diameter preconditioning densifier, with INS_AUTOM_180_300 automatic input slider, 73" diameter 4 blade rotor, under driven by 500kw(670hp) ac motor, 212mm diameter single screw melt extruder, 3S technology mixing, driven by 560kw(750HP) ac motor.
-SAS_2500 powder exhaust system with cyclone collector and blower for preconditioning densifier
-SW_8_250_RTF backflush filter screen changer, 4 position with (8) 250mm diameter screens, 7.5kw hydraulic power pack.
-Erema cascade degassing extruder, driven by 350kw(469hp) ac motor, with dual side degassing vents with 7.5 hp liquid ring vacuum pump system with BWB_1500_S water system with 2.2 kw circulation pump, and stainless steel water basin.
-HG_344D hot die face pelletizer driven by 2.2kw(2.9HP) ac motor with (6) blade cutting head, stainless steel water ring housing with WSP_700 water pump station with heat exchanger and circulation pump.
-GS_3010_1000 pellet dewater screen, stainless steel screen deck, driven by dual .55kw vibro motor with water catch basin.
-GZ_1000_M22 centrifugal pellet dryer, 500mm(19.6")diameter driven by 22kw(29.5HP) ac motor
pellet transport system with cyclone collector with rotary air lock and blower.
-integrated EL_Smart operator hmi control station, control panels with PLC controls, and extruder motor frequency controllers.
system built 2018.

This equipment is located in US