Listings similar to "FERROMATIK MILACRON MAXIMA 200 Injection moulding machine" 60

Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 100 Screw Diameter (mm): 30 Max Shot Weight (PS) (g): 89 Control System: Selog…

Tie Bar Distance :610×610mm Screw Diameter :55mm Theoretical injection capacity : 522㎝3 Injection mass :495g Maximum injection pressure: 177.2Mpa…

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

BMB 1000 T injection press Reference: 7500/1000 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: …

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 50 Screw Diameter (mm): 32 Max Shot Weight (PS) (g): 86 Control System: Procan…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. …

Brand:BMB Model:MC 350 Tonnage:350 Year:2001 Clearence between tie-bars:900x630 Screw diameter:70 Calculated shot volume:1300 cm3 Min/Max moul…

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Arburg Bimaterial of 100 tons of force in the closure. 79,115 working hours. The machine is delivered completely reconditioned by our team and in per…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total pro…