Formulatrix Mantis V3.3 ACC Microfluidic Microplate Dispenser with LC3 Upgrade

Listing description

Formulatrix Mantis V3.3 ACC RFID Microfluidic Microplate Dispenser
Large Capacity Chip Changer (Single LC3)
24 Position Carousel
Mantis to LC3 Power Cable
(2) USB A - B
Windows 10 Laptop
Factory USB with Manits control software ver4.7.3.8
Communication and power cables.

Formulatrix Mantis V3.3 ACC Microfluidic Microplate Dispenser wih LC3 Configuration:
(26) Interchangeable chip dispensers
2 chip dispensers installed on Mantis V3.3 and large capacity LC3 24 chip changer upgrade make up to 26 chip capacity, allowing you to dispense complex plates and assay development experiments.
The chip changers are compatible with High Volume (HV), Low Volume (LV), High Volume PFE, Low Volume PFE. (Chips are not included).
LC3 is fully integrated into the Mantis software. RFID technology identifies all chips stored on the LC3.
(2) wash stations allow for easy sterilization during dispensing.
Sample dispensing into microfuge tubes: 24 chips with 15 mL and 18 chips with 50 mL tubes
Plate format: SBS plates up to 1536-wells including 96- and 384-well plates, with a maximum height of 54 mm.
Dispense speed:
100nL per well to 96-well plate - 25 seconds
5 ul per well to 384-well plate - 2.5 minutes
20 ul per well to 384-well plate - 7.5 minutes
Dispense volumes down to 100nL at CV <3%
Dead Volume: as little as 6uL
Mantis with LC3 Dimensions (WxHxD): 50 x 28.6 x 24cm. | 19.76 x 11.26 x 9.45in

This equipment is located in US