Formulatrix Tempest V3.1 Liquid Handler Nanoliter Multichannel Reagent Dispenser

Listing description

Formulatrix Tempest V3.1 Liquid Dispenser
Vacuum Pump
Computer running Tempest v3.1 Software
Communication and power cables
Six used chips are included, so you can test the instrument once you receive it before purchasing new chips.

Formulatrix Tempest V3.1 Liquid Handler Configuration:
Microplate compatibility: 96,- 384-well microplates (Flat, Round, and V-Bottom)
Version 3 has upgraded plate clearance to accommodate dispensing into deep well blocks
Volume range: 200nL with no upper limit
Dispense Method: high-volume non-contact micro-diaphragm dispense chips (Qty. up to 12)
6 chips total installed alternating between High and Low volume: 3 high volume and 3 low volume
Max reagents: dispense up to 12 different reagents; 96 independently controlled outputs.
Features: independent channel control, can unclog itself, two separate wash inputs, removable nozzles, can dispense beads/cells
Dispense rate for 200 nL to 96-well plate: ~3 seconds
Dispense rate for 200 nL to 384-well plate: ~6 seconds
Dispense rate for 5 uL to 96-well plate: ~4 seconds
Dispense rate for 1 uL to 384-well plate: ~5 seconds
Dispense rate for 10 uL to 384-well plate: ~9 seconds
Dispense rate for 20 uL to 384-well plate: ~13 seconds
Microfluidic chip dead volume: less than 40 uL
Pipette tip dead volume: less than 100 uL
Power requirements: 100-240 VAC, 50-60 Hz, 125 W
Pressure: 30-35 psi @ 0.15 cfm = 2.0 bar @ 4.3 lpm
Vacuum: 22 inHg @ 0.2 cfm= -750 mbar @ 5.7 lpm
Dimensions (WxDxH): 55.5 x 32.5 x 26.5 cm. | 22 x 13 x 10.5 in.
Weight: ~11.5 kg | ~25 lb

This equipment is located in US