Listings similar to "Haas St-30 2009" 60

Work-capacity Max. swing diameter 675 mm/ 26.5" in Max. machining diameter 380 mm/ 14.9" in Max. machining length 538 mm/ 21.1" in Max. bar mater…

Okuma LU300 2MC600 CNC Lathe (2010) Chuck Size: 10" Bar Capacity: 2.4" # Axis: (4 Turning) # Axis: (1 Milling – “C” Axis) Power: 30 hp Max RP…

Year 2008 CNC Control yes Type of CNC Control Fanfuc 0i-TC # Axis 3 Swing 19.7 inches Turning Diameter 12.8 inches Center Distance 12.54 …

Milling/Drilling Capabiity Subspindle Chip Conveyor LNS Express 220 Bar Loader Fine Filter Coolant Parts Exit Conveyor System Card Interface R…

Make Haas, made in USA Model ST 30 Year 2012 Control Haas CNC control Chuck size 254.0 mm Distance between centres 762.0 mm Max. Cutting …

---MACHINE SPECIFICATION--- X-AXIS STROKE: 200MM Z-AXIS STROKE: 380MM SPINDLE SPEED MAX: 4500 RPM RAPID X-AXIS: 18M/MIN RAPID Z-AXIS: 24M/MIN S…

CNC Lathes Full C Axis Spindle Rotation (servo controlled) Live Milling/Drilling Capability Y Axis Capability 10" 3 Jaw Hydraulic Chuck (…

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

EQUIPPED WITH: Ganesh CNC Control Chip Conveyor (Built-In) - Parts Conveyor Coolant System CATALOG SPECIFICATIONS: Bar Capacity, Round 1.25" …

Machine Type: CNC Lathes Year: 2022 Manufacturer: Haas Model: ST-35Y Control: Haas 32 BIT Condition: Excellent Under Power: Yes …

---MACHINE SPECIFICATION--- SPINDLE NOSE SIZE A2-6 X-AXIS TRAVEL 7.4" Z-AXIS TRAVEL 6.6" SPINDLE MOTOR 11KW SPINDLE SPEED 2,000 RPM LIVE TOOL S…

Year 2010 CNC Control yes Type of CNC Control Fanuc 0i-TD # Axis 4 Swing 33.5 inches Turning Diameter 16.5 inches Center Distance 123 inc…

Doosan Puma 2000Y cnc lathe Specs: Year 2010 Control Fanuc 31i-A Number of Axes 4 Chuck Size Swing 23.6" Turning Diameter 13" Centers Distance 20.1"…

CNC Lathes Full C Axis Spindle Rotation Live Milling Capability Parts Catcher Chip Conveyor - Belt Type Tool Eye Programmable Hydra…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Control: Fanuc 31iA Condition: Used Under Power: Yes Specifications: Swing Over the Bed: 20" Turning Diameter: 9.6" Main Spindle: Ch…

Machine Type: Swiss Lathes Year: 2011 Manufacturer: Tornos Model: Deco 13a CNC Swiss Type Turning Center Control: Tornos Fanuc PNC-Deco …

Machine Type: CNC Lathes Year: 2008 Manufacturer: Toolmex Model: TUR-630A MN/3000 Control: Siemens 840D Condition: Used - Excellent Under Power…

2011 Takamaz Model XD-8 CNC Lathe X-Axis Stroke: 200mm Z-Axis Stroke: 380mm Spindle Speed Max: 4500 RPM Rapid X-Axis: 18m/min Rapid Z-Axis: 24…

Made in: 2001 Characteristic: After GO Control system: HAAS Spindle bore: 65 mm Maximum-turning length: 660 mm Number of tools in the maga…

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, w…

Bar Capacity: 1.77” (2.00”) Machining Diameter: 9.6″ Swing Over Diameter: 20″ Main Spindle Spindle Speed: 5,000 RPM Spindle Nose: 5″ Spindle …

Chuck size 254 mm Max. workpiece rotation 533 mm Max. cutting diameter (with BMT65 turret) 349 mm Maximum cutting length (varies by workpiece clam…

Manufacturer: Hurco Model: TM8 Control: Hurco WinMax Condition: Used Under Power: Yes Capacity: Chuck Size: 8" Swing Over Cross Slide: 11…

2011 Eurotech B465 Y2 Twin Spindle Lathe with dual Y-Axis. 2.56" bar capacity, 4000/5000 RPM speed, collet chucks, Fanuc control, bar feeder, conveyo…

Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm W…

HAAS “BIG-BORE” CNC TURNING CENTER New November 2001, Model SL30TB EQUIPPED WITH: Haas CNC Control 4″ Big Bore Drive System Collet Chuck – 12-Po…

It has been very well serviced and maintained Following spare parts coming with the machine Various boards, contactors and electrical cables -Cont…

Specifications: Max. Turning dia o/slide 760 mm dia. Max. Turning diameter 405 mm dia. Turning Length 860 mm Spind…

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 103mm, chuck 315mm, c…