Listings similar to "Haas ST-30SS" 60

Chuck Size 6" Bar Capacity 2" Swing 17.7" Turning Diameter 8.66" Max Turning Length- 11.41" X-Axis Travel- 6.2" Y-Axis Travel- 13.00" Spindle …

Make Haas, made in USA Model ST 30 Year 2012 Control Haas CNC control Chuck size 254.0 mm Distance between centres 762.0 mm Max. Cutting …

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

Machine Type: CNC Lathes Year: 2022 Manufacturer: Haas Model: ST-35Y Control: Haas 32 BIT Condition: Excellent Under Power: Yes …

Dual Spindle Design Full C Axis Spindle Rotation (both) with Milling/Drilling Capability (3) Turrets, 2 Upper and 1 Lower Turret 24 Positions on E…

X-axis travel 175+10mm Y-axis travel 80(±40)mm Z-axis travel 555mm E-axis travel 660mm SPINDLE Spindle speed 4,500rpm /sub:6,000rpm Spindle nos…

CNC Lathes Full C Axis Spindle Rotation Live Milling Capability Parts Catcher Chip Conveyor - Belt Type Tool Eye Programmable Hydra…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Tri-Mist 850 Mist Collector | Chip Conveyor | High Pressure Pump | Fanuc 32i-B CNC Controls | Y-Axis Machining | Live Milling | Sub Spindle | LNS Exp…

Made in: 2001 Characteristic: After GO Control system: HAAS Spindle bore: 65 mm Maximum-turning length: 660 mm Number of tools in the maga…

EQUIPPED WITH: Fanuc Oi-TD CNC Control C-Axis w/Live Tooling Y-Axis Functionality Collet Chuck - 10" 3-Jaw Chuck - Steady Rest 12-Position VSI …

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, w…

Chuck size 254 mm Max. workpiece rotation 533 mm Max. cutting diameter (with BMT65 turret) 349 mm Maximum cutting length (varies by workpiece clam…

Control: Fanuc Condition: Used Under Power: Yes Specifications: Number of Axis: 9 Machining Center: 32.28" Chuck Size: 6" Max. Spindle Sp…

Max Work Swing 24.8” Swing Over Cross Slide 21.3” Max. Turning Diameter 14.9″ Max. Turning Length 18″ Max. Workpiece Weight 375 lbs. (Chuck) / 1,…

Swing over the Cross-slide 755mm Bar Capacity 65mm C axis 0.001 degree Center Height 210mm (8") Maximum Cutting diameter 366mm Maximum Cutting L…

Mori Seiki CNC Lathe w/ Loader Model: CL-1500 Date of Manufacture: 9 / 2013 Electrics: 220 Volt; 3 Phase; 60 Cycle Main Spindle (approx.): 10 / 7…

Bed Turning Diameter mm: Ø 580 Max. Turning diameter mm: Ø 235 Max. Swivel length mm: 310 Hydraulic chuck diameter mm: Ø 210 (8'') Turning diamet…

Bar Capacity: 2.5" Spindle Speed: (Main/Sub) 5,000 RPM Spindle Motor: (2) 30HP HP X Axis Travel: 19.5" Z Axis Travel: 61.4" Rapid Rate Z Axis: 1…

Max Swing Over Bed: 29.72" Machine Dimensions: 107" X 76" X 85" H Turret Positions: 12 Stations Milling Motor: 7.5 Hp Milling Speed: 6,000 Rpm S…

Specifications: Max. Turning dia o/slide 760 mm dia. Max. Turning diameter 405 mm dia. Turning Length 860 mm Spind…

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 103mm, chuck 315mm, c…

Made in: 2007 Characteristic: Spindle speed: 4000 1/min Axis X: 215 mm Axis Z: 508 mm Length: 3213 mm Width: 1880 mm Height: 1778 mm W…

HAAS “BIG-BORE” CNC TURNING CENTER New November 2001, Model SL30TB EQUIPPED WITH: Haas CNC Control 4″ Big Bore Drive System Collet Chuck – 12-Po…

Max. Turning Diameter 8.66" Max. Turning Length 5.91" Travel X-Axis 5.91" Z-Axis 6.10" Speed range 50-4500 RPM Turret Type V12 NC M Motor …

It has been very well serviced and maintained Following spare parts coming with the machine Various boards, contactors and electrical cables -Cont…

Excellent Condition Low Hours 8.3" Chuck 4,000 RPM 24 Station BMT-65 Turret Royal QG42 Quick Grip Collet Chuck Live Tooling Tool Pre-Setter P…

The SB-20R Type G offers impressive machining versatility within a compact footprint. The SB series main spindle platen includes six turning tools, t…

Swing 25.25" Machining Length 16.5" Chuck Size 6.5" Bar Capacity 1.75" Power 15 hp Max RPM 6,000 RPM Turning Dia 14" Tailstock No Control CNC…

Excellent Condition 1,300 Hours 3,400 RPM Spindle A2-6 Spindle 12 Station BOT Turret 12" Hydraulic Chuck 3" Bar Capacity 3.5" Spindle Bore 21"…