Husky IND250 PET-P100/110 E120 Injection moulding machine

Listing description

Clamp Force : 2,500 kN
Tiebar Spacing (H x V) : 1,017 x 667 mm
Turret Block Face (H x V) : 880 x 660 mm
Clamp Stroke : 330 mm
Shut Height (Min-Max) : 465 - 730
Daylight (Maintenance stroke included) : 1,430 mm
Ejector Stroke : 106 mm
Ejector Force : 358 kN
Dry Cycle Time : 3 sec

Injection-
Plunger Diameter : 110 mm
Injection Pressure : 1,183 bar
Injection Stroke : 340 mm
Injection Capacity : 3,231 cc
Shot Size (Min-Max) : 372 - 3,344 gmPET
Melt Channel Diameter : 32 / 38

truder-
Screw Diameter : 120 mm
Screw L/D Ratio : 25:1
Transfer Stroke : 400 mm
Transfer Capacity : 4,524 cc
Transfer Capacity : 5,202 gmPET
Maximum Screw Speed : 60 RPM
Torque : 10,300 Nm
Throughput : 650 kg/ hr PET

Installed Power-
Pump : 150 kW
Machine Heaters : 92 kW
Temperature Controller (Mould) : 41 kW

Resin Dehumidifier-
Make : Piovan
Model : DS528
Installed Power : 66 kW

Mould Dehumidifier-
Make : Piovan
Model : RPA2000
Installer Power : 8.6 kW

Mould-
Size : 48 cavities x 2 (Dual Face)
Preform Description : 30/25 mm 22 gm ideally suitable for 1L water bottles. Click here to download preform drawing.
Cycle Time : 9.1 sec/ Output : 19,000 PPH
Number of Cycles Run : 6.2 million (approximate run time of 16,000 hours only)

This equipment is located in IN