-
Machinery
Choose from 20,025 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
Model 1540f1 machines are designed for roughing and finishing of various parts from stamping, forged and cast blanks from steel, cast iron and non-ferrous metals. Machining of parts is carried out with tools fixed in a five-position turret of the vertical support, which moves along the guides of the crossbar, as well as in a four-position tool holder of the horizontal (side) support, moving along the guides of the bed
Accuracy class H
Maximum height of the installed product mm 2000
The largest diameter of the installed product mm 4000
Faceplate diameter mm 4000
Main drive power kW 125
The greatest stroke of the slides of the vertical supports mm 1250
The greatest angle of rotation of the calipers deg -15
The greatest mass of the product installed on the faceplate kg 63000
The greatest cutting force on the right support kgf 6300
The greatest cutting force on the left support kgf 5000
The greatest total cutting force with two calipers kgf 10000
The greatest cutting moment on the faceplate kgf * m 16000
Limits of the rotation frequency of the faceplate min-1 0.52 - 48.7
Limits of vertical and horizontal feed mm / min 0.059 - 470
The greatest stroke length of the slide of the support mm 1600
Slide vertical feed and support horizontal feed (lowest - highest) mm / min 0.0435 - 352
Rapid movement speed of the slide and support mm / min 2950
Carriage boring spindle diameter mm 90
Maximum stroke length of boring spindle mm 800
Frequency of rotation of the boring spindle min-1 25 - 630
The greatest torque of the boring spindle kgf * m 220
Number of steps of spindle feed 8
Boring spindle vertical feed (lowest - highest) mm / min 0.0435 - 352
The greatest effort of the spindle feed kgf 2000
Side slide slide stroke mm 950
Caliper vertical travel mm 1820
The greatest cutting force with the caliper kgf 3000
Slide and support feed (smallest - largest) mm / min 0.059 - 470
Rapid stroke speed of the slide and support mm / min 2540
The largest diameter of end mill mm 110
The rotational speed of the face mill min -1 80 - 675
The greatest torque of the end mill kgf * m 30
Machine dimensions mm - length 5900 - width 10100 - height 7200 Height above floor level mm 6000
Machine weight kg 105 000
This equipment is located in LT
Manufacturer | Kolomna |
Model | VTL1540F1 |
Year | 1977 |
Country | Lithuania |
Condition | Good |
Main category | Metalworking Machinery |
Subcategory | VTL Lathe |
ID | P10422535 |