Listings similar to "Krauss Maffei 65-160 C2 Injection moulding machine" 60

State-of-the-Art Krauss Maffei KM100-180-180 CXV 2-Shot Injection Molding Machine with Robot Elevate your manufacturing capabilities with the Krau…

Tie Bar Distance :460×460mm Screw Diameter :40mm Theoretical injection capacity : 200㎝3 Injection mass :190g Maximum injection pressure: 190.8Mpa…

MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] …

Model: IS450FA2 27A Screw Diameter (MM): 80 Tie Bar H X V (MM): 810 X 810 Clamp (ton): 450 Year: 2005 Size (L X W X H) (MM): 8400 X 1600 X 3250…

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Data sheet Brand: ENGEL Model: VICTORY 500/120 Tech Tonnage: 120 Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 C…

Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2006 Clamp Force (t): 90 Screw Diameter (mm): 35 Max Sh…

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

SANDRETTO série 7 177/60 Force de serrage : 60 T - 600 KN Distance entre colonnes : 301 X 301 mm Dimensions des plateaux : 455 X 455 mm Epaisseur…

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: …

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

GENERAL SPECIFICATIONS YEAR 2005 BRAND ENGEL TIEBARLESS TONNAGE 65 TON SHOT SIZE 3.2 oz. MODEL NUMBER VC200/65 TECH TYPE HORIZONTAL MACHINE NO…

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

Made in: 2008 Characteristic: Distance Between Tie Bars: 320x320 mm Clamping force: 500 kN Weight of the injection molding machine: 2300 kg

Model: HTF 360X Screw Diameter (MM): 65 Tie Bar H X V (MM): 710 x 710 Clamp (ton): 360 Year: 2004 Shot Weight (Gram): 972 Size (L X W X H) (MM…

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

MARIO FONIO 111-4/L/SX Spreading machine description bext

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

Made in: 2010 Characteristic: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cm³ Distance between the columns (horizo…

Made in: 2008 Characteristic: Total hours: 70182 Total hours: 62173 h Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201…

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Heigh…

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Year: 2003 Operating hours: 56,891 h Screw: HVF 22 mm Injection pressure: 1890 bar Stroke volume: 123 ccm Clamping force: 60 t tie bar sp…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure o…