Listings similar to "Krauss Maffei KM 125-520-160 CZ Injection moulding machine" 60

State-of-the-Art Krauss Maffei KM100-180-180 CXV 2-Shot Injection Molding Machine with Robot Elevate your manufacturing capabilities with the Krau…

MC6 control with color monitor Clamping unit Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] …

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

BMB 1000 T injection press Reference: 7500/1000 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars …

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing …

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing…

Data sheet Brand: ARBURG Model: 630 S 2500-1300 Tonnage: 250 Year: 2000 Column passage: 630x630 Screw diameter: 55 Calculated injection volume…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

This Krauss Maffei 800-8000 MC Injection Moulding Machine was built in the year 1999 in Germany. It is equipped with a control unit of the same brand…

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Heigh…

Made in: 2010 Characteristic: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cm³ Distance between the columns (horizo…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 217 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 570 cm³ Length/diameter ratio: L/D Maximum injection rate: 618 cm³/s Pressure …

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 40 cm³ Length/diameter ratio: 23 L/D Maximum injection rate: cm³/s Pressure on…

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

Type: KM 300-1400 C1 Producer: Krauss Maffei Made in: 2001 Characteristic: Hours on: 70.000 h Clamping force: 300 t Screw diameter: 60 mm I…

Year: 2003 Operating hours: 56,891 h Screw: HVF 22 mm Injection pressure: 1890 bar Stroke volume: 123 ccm Clamping force: 60 t tie bar sp…

Second screw: Screw diameter: 45 mm Injectable volume: 275 cm3 Injectable weight: 250 g Injection pressure: 1878 bar Nozzle center distance: 300…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…