Mori Seiki NTX-1000SZ

Listing description

Mori Seiki NTX1000/SZ CNC Mill/Turn Center with Sub Spindle, B-Axis Milling Head, 76 Station Tool Changer,and Lower Turret
Age: 2011

Specification:
Control Mori Seiki MSX-711 IV (Fanuc)
Spindle Speeds 6000 RPM
Spindle Nose A2-5
Spindle Through Hole 2.40"
Spindle Indexing 0.0001 Degrees
Max Workpiece Swing 14.57"
Distance Between Centers 35"
Maximum Turning Diameter 14.57"
Maximum Turning Length 16.69"
Bar Capacity 2.05"
Spindle 2 Speed 6000 RPM
Spindle 2 Through Hole Diameter 1.50"
Spindle 2 Nose Type 3.15" G6 Flat Nose
Spindle 2 Min Index Angle 0.0001 Degree
Turret Travel X/Z 6.10" / 24.01"
BW-Axis 4-Position Index
Milling Head Travel X/Y/Z 14.96" / +/- 4.13" / 18.11 + 6.10 (ATC Travel)
Milling Head Rapid Rate X/Y/Z 1574.8 / 1574.8 / 1968.5 IPM
Milling Head Spindle Speed 12,000 RPM
Milling Head Spindle Taper Capto C5
Milling Head B-Axis Range / Min Index Angle +/- 120-Degrees / 0.0001 Degree
Tool Magazine Capacity 76
Max Tool Diameter With/Without Adjacent Tools 2.76" / 5.12"
Max Tool Weight 11 lbs
Max Tool Length
9.84" (If Tool Diameter Less Than 2.76"); 8.27" (If Tool
Diameter 2.76" or More)
Equipped With:
Mori Seiki MSX-711 IV CNC Control (Fanuc)
12,000 RPM B-Axis Milling head with 76 Station Tool Changer (Many
Capto Tool Holders Included)
Schunk Quick Change 7.25" 3-Jaw Chucks on Main & Sub Spindles
5000 RPM Main Spindle with C-Axis, 6000 RPM Sub Spindle with C-Axis
10-Station Bolt on Lower Turret (X,Z)
Tool Presetter
Renishaw Parts Probing System with Dual Reader Eyes for Main & Sub Spindle Probing
Parts Exit Conveyor
Chip Blaster High Pressure Coolant Unit with Through Spindle Coolant on Milling Head
Daikin Inverter Chiller Unit
LNS Turbo HB Chip Conveyor
USB Port, Keys, Machine Manuals.
Electrics:
220 Volt 3 Phase
Approximate Machine Dimensions: 128.00"L x 104.00"W x 98.00"H
Approximate Weight: 19700.00 lbs.

This equipment is located in US