Listings similar to "Negri Bossi V110 1100H 375 Injection moulding machine" 60

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 ba…

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max…

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

BMB 1000 T injection press Reference: 7500/1000 Closing force: 1000 T Screw diameter: 110 mm L/D ratio: 22 Maximum material pressure: 1600 bars …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Model: ve210-960, 15.3 oz (435 grams), man. YOM: 09/2005 dimi controls, 20.08" x 22.44" (570 mm x 790 mm) tie bar spacing, 31.89" x 34.25" (870 mm…

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

Data sheet Brand: ARBURG Model: 420 C 1000-150 / 150/60 Tonnage: 100 Year: 2001 Column passage: 420X420 Screw diameter: 35mm -25mm -22mm Calcu…

Centering ring diameter on the plate is 160 mm (not the standard 125 mm) This machine was regularly maintained and has CE norms. Type of used …

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

Clamping force : 1000 Ton Screw diameter : 120 mm Distance between column : 1120 mm x 1120 mm Shot volume : 6220 cm³ Robot connection : Euromap-…

Clamping force : 720 Ton Screw diameter : 100 mm Distance between column : 950 mm x 950 mm Shot volume : 3926 cm³ Shot weight : 3700 g Robot con…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Condition: Refurbished with guarantee Clamp Force (t): 35 Screw Diameter (mm): 28 Max Shot Weight (PS) (g): 84 Control System: Dimi Microprocesso…

Brand:NEGRI BOSSI Model:ELEOS 120 Tonnage:120 Year:2014 Clearence between tie-bars:480x440 Screw diameter:40 Calculated shot volume:232 Min/Ma…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

INJECTION UNIT Screw diameter: 85 mm Calculated injection volume: 2128 cm³ Length / diameter ratio: L / D Pressure on the material: 1624 bars …

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Second screw: 30 mm Injection volume: 106 cm3 Injectable weight: 94 g Injection pressure: 1990 Between nozzle: 150 mm this extra information i…