New Piranha Hydraulic Ironworker

Listing description

Notable Features
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.
2. Mechanical Shear Hold-downs- clamps material at change of material thickness. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the square upper angle knife has four cutting radiuses to better fit the angle being sheared, giving you lower distortion and a higher quality cut.
6. Coper Notcher- the low rake angle blade keeps part flat and under control during notching.

Standard Equipment
Mechanical Hold Down
Punch Holder, Urethane Stripper, & Die Block
Set of Angle Knives
Set of Coper Knives
Instruction/Parts Book/Video Link
Coupling Wrench
1/2” Allen Wrench
Foot Switch
Set of 13” Plate Shear Knives

**Available Options With Pricing Will Be Included In Quotation**

Specifications
Punching Capacity: (50 Tons) 13/16” diameter through 3/4” plate
Throat Depth: 5”
Bending: (Optional) 6” up to 12” w/4-way die block
Round Bar Shear: 1/4” through 1-3/8”
Square Bar Shear: 1/2” through 1”
Flat Bar Shear: 12" x 3/8", 10" x 1/2”, 6” x 3/4”
Angle Shear: 3” x 3” x 3/8”
Coping/Notching: 2-1/4” x 3” x 1/4”
Motor: 3 HP, 3 Phase
Weight: 1,700 Lbs.

This equipment is located in US