Nutek NTM510ICXXL-1000-1 Inspection Conveyor

Listing description

Nutek Inspection Conveyor, XXL size, 1000mm (NEW TYPE)
Type: NTM510ICXXL-1000-1
Year of Manufacture: 2014
Direction: Left to Right
Transfer height: 900mm (+/-25mm)
PCB size: 50 – 600mm (W)/ 80 – 950mm (L)
Product thickness: 0.60 – 1.60mm
Component Height: Top: 30mm max/ Below: 30mm max
Voltage: 220V, 50/60Hz
Pressure: – Bar
Air consumption: – l/minute
Dimension (in mm): 1000 (W) x 860 (D) x 910 (H)
Weight: 80Kg

Function:
This machine function to transfer PCB from Upstream machine to Downstream machine. It can function in two different modes:

Linking mode:

In this mode the machine function to transfer PCB from Upstream to Downstream machine through communication signal.

Inspection Mode:

In this mode, it functions similarly to a Linking conveyor with an additional check feature for visual inspection of PCB. This will allow the PCB to stop at conveyor’s check sensor position for inspection. After inspection press Release push button to resume its PCB transfer.
Only one PCB is allowed on the machine during each cycle of transfer.

This equipment is located in GB