Okamoto OGM-82OU

Listing description

8.6" X 20" OKAMOTO UNIVERSAL I.D/O.D CYLINDRICAL GRINDER
W/FANUC POWERMATE-G "MDI" CONTROL

-PROGRAMMABLE TABLE TRAVERSE, AUTO INFEED, PLUNGE, RAPID,
SPARKOUT TIMER, DRESSING CYCLE, AND MACHINE FUNCTIONS.
-BALLSCREWS FOR TABLE TRAVERSE & WHEELHEAD MOVEMENTS
-FANUC AC SERVO DRIVES

MODEL: OGM-820U NEW: 1998

SWING OVER TABLE ...................... 8.6"
DISTANCE BETWEEN CENTERS .............. 19.68"

MAXIMUM TABLE TRAVEL .................. 30"
TRAVERSE SPEED ........................ 0 TO 160" IPM
SWIVEL ANGLE .......................... 0 TO 9 DEG.

GRINDING WHEEL SIZE ................... 12" X 1" X 5"
GRINDING WHEEL SPEED (2) .............. 2,000/2,240 RPM
WHEELHEAD TOTAL STROKE ................ 8"
SWIVEL ANGLE .......................... +/- 30 DEGREES
AUTOMATIC INFEED (19 SETTINGS) ........ 0.00001" TO .002"
CONTINUOUS FEEDRATE (PLUNGE) .......... 0 TO 157" IPM
MANUAL PULSE FEED (3) ................. 0.00001", 0.0001"
& 0.001"
WHEELHEAD RAPID RETRACT ............... 1.5"
RAPID FEEDRATE ........................ 157" IPM
SPARKOUT .............................. 0 TO 10 PASSES

WORKHEAD SPINDLE TAPER ................ #3 MT
SWIVEL ANGLE .......................... +30/- 90 DEGREES
WORKHEAD SPINDLE SPEEDS ............... 15 TO 650 RPM

TAILSTOCK SPINDLE CENTER .............. #3 MT
TAILSTOCK SPINDLE STROKE .............. 0.8"

APPROX. MACHINE WEIGHT ................ 6,700 LBS.
APPROX. DIMS. ......................... 110" x 69" x 66'H

EQUIPPED WITH:
FANUC POWERMATE CONTROL
-PROGRAMMABLE TABLE TRAVERSE, AUTO INFEED, PLUNGE, RAPID,
SPARKOUT TIMER, DRESSING CYCLE, AND MACHINE FUNCTIONS.
BALL SCREWS FOR TABLE TRAVERSE & WHEELHEAD MOVEMENTS
FANUC AC SERVO DRIVES
SWING DOWN INTERNAL GRINDING ATTACHMENT W/(1) SPINDLE
3/60/230-460 VOLT ELECTRICS
COOLANT SYSTEM

"The OGM MDI Series - Choose from4versatile grinding cycles.

- (1) Plunge for rapid stock removal

- (2) Shift-Plunge/Traverse for fast stock removal and fine finish

- (3) Traverse with in feedatright end, 'eft endorboth ends for fine finish

- (4) Manual Traverse that eliminates theneed for program input-saves time -
ideal for single workpiece requirements"

The OGM's Servo Driven
Wheelhead is designedtowithstand the rigorsofhigh volume production work,
yetdeliver consistentfinefinish capabilityto"tenths".
Its built-in rapid advance/ retract simplifies set-up- areal conveniencefeature.
The wheelhead incorporatesacartridge type wheelspindle (Iubed for life) that provides
the utmostinreliability and easeofmaintenance.

** EXCELLENT CONDITION & APPEARANCE **

This equipment is located in US