Prima Power Platino 1530 laser cutting machine

Listing description

The PRIMA POWER PLATINO 1530 laser cutter was built by the Italian company Prima Power in 2012. It has a Primach 20L CNC control and a Rofin Sinar DC 025 CO2 laser with a power of 2.5 kW and a wavelength of 10.6 um. The laser cutter allows you to cut sheet metal with the maximum dimensions of 3000 x 1500 mm, 15 mm thick and weighing 250 kg. The laser gas consists of He, CO2 and N2. In addition, the equipment includes, among others, the Water Chiller HYFRA svk 320-1-s, as well as the Donaldson Torit DCE dedusting system.

Technical parameters of the PRIMA POWER PLATINO 1530 laser cutter

- machine time worked: 24800 hours
- power: 2500.0 W
- CNC control: Primach 20L
- X travel: 3000.0 mm
- Y travel: 1500.0 mm
- working area: 3000 x 1500 mm
- maximum sheet length: 3000.0 mm
- maximum sheet width: 1500.0 mm
- maximum sheet thickness: 15.0 mm
- maximum load on the table: 250.0 kg
- machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm
- machine weight: 12000.0 kg

Rofin Sinar DC 025 CO2 laser specification

- type: CO₂
- laser: Rofin Sinar DC 025
- power: 2,500 Watt
- power stability: + -2% FS
- wavelength: 10.6 µm
- gas type: He 67.7%; CO2 4.1%; N2 28.2%
- beam propagation factor M2: 250 microseconds, 70 used resolutions
- positioning accuracy: + -150 radians
- operating conditions: maximum / minimum ambient temperature 40 degrees C / 10 degrees C
- relative humidity: <95% non-condensing
- diode laser wavelength: 635 nanometers
- diode laser output power: <1 milliwatt

Cooling:
- required cooling capacity: 31 kW
- Flow Rate: 133 LPM (35 GPM)
- inlet temperature: 18 - 20 degrees C
- maximum inlet pressure: 6 Bar
- nominal inlet pressure: 3 Bar
- pressure difference: 2 Bar
- liquid: distilled water
- filter requirements: 100 microns

Connections:
- water: hose connector 1.25 "
- gas inlet: 6mm tube nipple
- exhaust: 0.5 "pipe nipple
- drain: pipe connector 8 mm 8

CO2 laser dimensions and weight:
- width: 850 mm
- height: 887 mm
- length: 2551 mm
- weight: 1140 kg

Additional parameters and accessories of the PRIMA POWER PLATINO 1530 laser
- compliance with CE standards
- protective cabin
- light barrier
- CE safety
- Water Chiller HYFRA svk 320-1-s
- Donaldson Torit DCE dedusting system

This equipment is located in PL