Listings similar to "Profile 200 Extrude Hone" 60

Manufacturer: BANDERA Year: 2000 Nr.1 Extruder mono screw BANDERA type TR50S/30D year 2000 Nr.2 Extruder BANDERA type TR35S/30D year 2000 Nr. 2…

Manufacturer: GHIOLDI Model: COEX 3 Year: 2000 Number of layers: 3 Film structure: ABC Material: LDPE/LLDPE, HDPE Film Width: 2200 Output (Kg/…

Used 1.5″ Davis Standard 15IN20E Single Screw Extruder Brand Davis Standard Model 15IN20E Year of Mfg 1988 Screw Size 1.5" Gear Ratio 6.53:1 …

4.5″ Sterling Single Screw Extruder 200 HP (motor was purchased rebuilt 1 year ago) New VFD Drive (purchased new 1 year ago) 30:1 L/D Vented Barr…

Used 3.5″ NRM Pacemaker 70 Single Screw Extruder Brand NRM Model Pacemaker 70 Year of Mfg 1971 Screw Size 3.5" Motor 75 HP Gear Ratio 17.43:1…

Description 3.5″ NRM PM70 – 24:1 – WATER COOLED EXTRUDER & 3 ROLL SHEET STACK W/SHEAR 3.5″ NRM – PM70 24:1 – water cooled Extruder 24:1 – 75 HP …

Motor (1) Brand Direct Current Horsepower 200 Voltage 500 V RPM 1750 Motor (2) – Motor (2) Brand Emerson Motors Motor (2) Model F…

Used 30 mm 34/1 L/D Werner & Pfleiderer Coperion co-rotating twin screw extruder. Model ZSK30, serial #180056, new 1981. Driven by 15 hp DC motor wit…

Screw ø 60-30D; approx. 300 kg/h Co-Extruder design, mobile cabinet and operation panel D.C. motor 100 kW

Model 1243164 Type ZSK-83 Year of Mfg 2014 Motor Siemens 200 HP Gearbox Ratio 1:4.95 Max Screw Speed 1200 Vacuum Pumps Yes Quant…

Used Brown Egan 3.5″ and 4.5″ Single Screw Extruder Model 4522-D Year of Mfg 1998 Screw Diameter 80 mm Control Panel PLC 6016-MX Voltage 460 V…

Screw Diameter 67mm Drive 100 HP DC Bardac Vents 2 Vents L/D Ratio 34:1 Cooling Air Cooled Gearbox Ratio 7.3:1 Screw Type Co-Rota…

65 mm Jinhu Twin Screw Extruder 50HP,480 volts with a ABB drive 1- Spare Distributor gear box 1-Spare Reduction gearbox

Manufactured 1987 Specifications Features L/D Ratio: 30:1 Screw Diameter: 3.5" - 7 Zone Electrically heated, water cooled (closed loop) an…

Year of Mfg 1996 (Note: Rebuilt by Coperion in 2008) Motor Siemens 400 HP Screw Diameter 120mm Gearbox Ratio 1:4.95 Note With Booster P…

Brand Brampton Engineering Model 250-24-AC Year of Mfg 1993 Screw Diameter 2.5" Vented Non Vented Cooling Air Screw Typ…

Manufacturer: DOLCI Model: NEXTROM Year: 2000 Number of layers: 3 Film structure: ABC Material: STRETCH FILM; LLDPE Film width (mm): 2000 Spee…

double screw ø45mm 30D Year: 2000 The machine is located in France.

Screw 65mm Motor HP 50 # of Heater Zones 4 # of Cooling Stations 3 # of Die Zones 6 Voltage 460 Volt 3 Phase 60 Hz Quantity 2 Ava…

Battenfeld UnI0EX2-90 – New 1985 Category: Extruders

Manufacturer: GHIOLDI Model: COEX 5 Year: 2000 Operation: Yes Number of layers: 5 Overhaul/renovation: New thickness control system Innoplast F…

Manufacturer: WINDMÖLLER & HÖLSCHER Model: VAREX Year: 2000 Number of layers: 3 Film structure: A-B-C Material: LDPE, MDPE Film Width: 1800 Ou…

Manufacturer: BANDERA Model: ( COEX )
 Year: 2001 Number of layers: 5 
Material: Barrier film with PA, EVOH, lamination film,adhesive resins, 
F…

Used 71mm ICMA San Giorgio 325 HP 38:1 L/D Twin Screw Extruder Brand: ICMA San Giorgio Model: MCM 71VM – 44D Year of Mfg: 2000 L/D Ratio:…

Description Machine Twin Screw Extruder Brand Xinda Model SJW-45 Year of Mfg 2006 L/D Ratio 20:1 Weight 1,400 kg …

Screw ø 60-30D; approx. 300 kg/h D.C. motor 100 kW The machine is located in Germany.

• New conical screws • New barrel • New thermoregulation • Motor power: 54kW • Profile screws geometry • Maximum output : 200kg/h • Very good o…

- Year: 1982 - Screw Diameter: 1.25" - L/D Ratio: 24:1 - Cooled: Air - Motor: 5HP AC Vector Motor with AC Vector Motor Control - Voltage: 240-3-…

Manufacturer: REIFENHAUSER Year: 1999 Number of layers: 3 Film structure: ABC Material: LDPE , LLDPE Film Width: 1600 Extruder 1 Layer ref: : A…

Screw Ø 60-25D, approx. 60-80 kg/h The machine is located in Germany.