Roberts Sinto SCC-90A Core Center

Listing description

SCC 90-A CORE CENTER SPECIFICATIONS
Capacity: Single Blow – 90 pounds – Core or Mold
Double Blow – 130 pounds – Core or Mold
VERTICAL HORIZONTAL
CORE BOX MOUNTING AREA (inches) 23 ¼” Hi x 27” Deep 24” Hi x 27” Deep
MAXIMUM WIDTH OF CORE BOX 18" (9”/9”) 27"
MAXIMUM DEPTH OF CORE BOX 27" 27"
MAXIMUM WEIGHT OF CORE BOX 440 LBS. – Total(Vacuum)1650 LBS. - Total
1650 LBS. – Total (Bolted)
MAXIMUM CORE BOX HEIGHT 24" 30.625” Daylight
MAXIMUM OPENING OF PLATENS 45" N/A
MINIMUM OPENING OF PLATENS 8" N/A
MAXIMUM BLOW AREA 16” x 25” 22” x 25”
TRAVEL OF MANDREL TABLE 39" 39"
SAND HOPPER CAPACITY 180 LBS. 180 LBS.
DRY CYCLE TIME, LESS THAN 25 SECONDS 25 SECONDS
ELECTRICAL REQUIREMENTS: U.S.A. POWER: 230/460 VAC, 3 Phase, 60 Hz
CONTROL: 110 VAC, 1 Phase
AIR REQUIREMENTS 1.5 NPT LINE @ 1.5 NPT LINE @
75-100 PSI 75-100 PSI
TYPICAL AIR CONSUMPTION 18 CFM/CYCLE 18 CFM/CYCLE
NOMINAL @ 80 PSI NOMINAL @ 80 PSI
OVERALL DIMENSION OF MACHINE 11’ WIDE x 11’-6” LONG x 14’-6” HIGH
APPROXIMATE WEIGHT OF MACHINE 15,000 LBS.

This equipment is located in US