Safeline Powercheck X-Ray X36 Series Inspection System

Listing description

METTLER TOLEDO SAFELINE METAL DETECTOR X-RAY INSPECTION
220 volts, 1 ph, 60 hz, 10 amps, 80 psi, year of construction 2016
Feature Specifications
Conveyor Speed Typical line speeds 10-100 m/min (dependent on product dimensions)
Lane Configurations Single or multilane applications
Throughput Rate Typical throughput rates up to 1000 products per minute (dependent on product dimensions)
Maximum Product Height 240mm with a reject, 300mm without reject
X-ray Detector
300, 400, 500, 600mm - 0.4 or 0.8mm diode size
800mm available with 0.8mm diode size
X-ray Generator
20W, 84kV, 0.25mA Glass or optional Beryllium tube (20W options are not available for the 800mm detector width)
Optimum Power 100W, up to 84kV, up to 3.3mA Glass or optional Beryllium tube
420W, 84kV, 5.0mA Glass or optional Beryllium tube
300W, 100kV, 3.0mA Glass or optional Beryllium tube
X-ray Beams Single vertical beam
X-ray Emissions < 1uSv/hr
X-ray Protections Fully contained emissions within construction, lightweight lead-free blue curtains at tunnel apertures
Cooling Method
20W = Internal Fan (no external cooling)
100W Optimum Power = Air Conditioner
300W, 420W = Radiator Pump & Air Conditioner
Operating Humidity Up to 90% RH
Operating Temperature 5 – 40°C
Power Supply
208 - 240 Vac, 1 phase, 50-60Hz, 10A Max
100 - 120 Vac, 1 phase, 50-60Hz, 16A Max
Pneumatic Supply 6 Bar(g) clean air supply required for air operated reject system
Casing Material 304 stainless steel
Finish 180-240 Grit Brushed on main components
Ingress Protection IP65 as standard. IP69 as an optional upgrade
Operating Height 750mm, 850mm, 950mm, 1050mm or 1150mm (+/- 50mm)
System Conveyor FDA and EU food use approved TPU conveyor belt, 0.55kW motor unit, 60mm diameter roll ends
System Length 1200mm, 1320mm, 1850mm, 2100mm or 2300mm options
Screen Display 15” Capacitive Touchscreen display (16:9 aspect ratio)
Reject Type Pusher, airblast, lift flap or retracting belt options
Reject Collection Lockable bin, lockable tray, lockable roller tray, reject blanking plate, gravity fed roller track
Operating System Microsoft Windows 64bit
Connectivity Options Ethernet connection available
Traceability Options Full event log tracks changes of parameters, users and products
Guide Rails Optional infeed or full length guide rails up to reject station. 10mm round bar style, 5mm Flat face bar or side roller
UL Approved Yes

This equipment is located in CA