Listings similar to "Sandretto MEGAT 4435/610 Injection moulding machine" 60

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max…

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

INJECTION PRESS, HYDRAULICS, TON., 1000 - Used Used Sandretto MEGA T 9208/1000 Injection moulding machine

Euromap classification: 2500-450 Closing Power: 45o Ton Year of Manufacture: 1991 Power: 83 kW Weight: 22,500 kg The press has always worked ver…

Tie Bar Distance :860×860mm Screw Diameter :80mm Theoretical injection capacity : 1880㎝3 Injection mass (polystyrene) :173g (polyethylene) : 137…

TONNAGE: 150 SHOT SIZE: 9 oz. MAX CLAMPING STROKE: 12.1” TIE BAR DIAMETER: 2.75” SPACE BETWEEN TIE BAR: 16” x 16” PLATEN SIZE: 24” x 24” …

Data sheet Brand: ENGEL Model: VICTORY 500/120 Tech Tonnage: 120 Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 C…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

SANDRETTO série 7 177/60 Force de serrage : 60 T - 600 KN Distance entre colonnes : 301 X 301 mm Dimensions des plateaux : 455 X 455 mm Epaisseur…

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thic…

INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressu…

Group E1300 / screw D63 / 863 cm3 / 1513 bar. Passage between columns 665 x 665 / trays 980. Stroke Mobile plate 660 / ejector 250. Maximum dimens…

Clamping force: 165 tons Distance between tie bars: 525x525 mm Clamping plates dimensions: 760 x 760 mm Mold Height min. / max. : 180 x 560 mm M…

Screw D65 / 863 cm3 / 1550 bars. Between columns 570 x 570 / trays 860 x 860. Mold thickness min 210 / max 730. Maximum ejector stroke 220. Total …

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 154 cm³ Length/diameter ratio: L/D Maximum injection rate: cm³/s Pressure on t…

SANDRETTO serie 9 860/2200 Clamping force : 220 T - 2200 KN
 Distance between tie bar : 510 X 510 mm Platen dimension : 770 X 770 mm 
Mould thic…

610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw len…

MARIO FONIO 111-4/L/SX Spreading machine description bext

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping …

This Krauss Maffei 800-8000 MC Injection Moulding Machine from 1998 was manufactured in Germany and is operated through a Krauss Maffei MC3F Control …

TONNAGE: 150 SHOT SIZE: 9 oz. MAX CLAMPING STROKE: 12.1” TIE BAR DIAMETER: 2.75” SPACE BETWEEN TIE BAR: 16” x 16” PLATEN SIZE: 24” x 24” …

Model: FT 110 Screw Diameter (MM): 35 Tie Bar H X V (MM): 400 X 340 Clamp (ton): 110 Year: 1996 Shot Weight (gram): NA PLC Model/ Controller: P…

GENERAL SPECIFICATIONS YEAR 1995 BRAND NISSEI TONNAGE 720 TON (PH660) SHOT SIZE 168 oz. MODEL NUMBER PH660S420B TYPE HORIZONTAL TECHNICAL SPEC…

SANDRETTO serie 8 612/95 Clamping force : 95 T Distance between tie bar : 370 x 370 mm Mould thickness min / max : 100 - 460 mm Opening strocke :…

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

SANDRETTO serie 8 1334/330
 Clamping force : 330 T - 3300 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Arburg Injection Moulding Machine. 130 tons of clamping force. Machine will delivery full checked tested and reconditioned in our workshop we can…

Billion H6860/900T Injection Molding Machine The machine is located in France. Year 1996 Screw diameter 105 mm

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pres…

Clamping force : 125T Screw diameter : 43 mm Between tie bar : 475X475 mm Shot volume : 319 cm³ Injection pressure : 2028 bar Mould thickness mi…