Sarong SG6 Filling machine -suppositories

Listing description

Line Composed of:
1) SARONG SG6 / R ALVEOLOS DOSING SYSTEM
Machine for the dosing and filling of containers for suppositories starting from the alveoli in continuous tape.
- The machine uses rolls of approximately 1,000 alveoli.
- It has a production of up to 7000 suppositories.
- Stainless steel 6-needle dosing pump.
- Stainless steel product container with water circulation to maintain
        the temperature to bath-maria. Capacity 30 L.
- High precision temperature regulation.
- The mixer has three speeds.
- 0.5 HP motor power. Voltage 220/380 III.
- Approximate measurements: 2,000 x 700 mm x 1,600 high.
- Approximate weight: 220 Kg.

2) FUSOR BOILER
- Stainless steel reactor, heated by electrical resistance of 220 V, 750 W, with
  safety thermostat.
- Capacity 30 L. (Internal Ø = 350 mm, Height = 350 mm)
- Total height based on current column: 900 mm
- Agitation type turbine with 4 blades + lower marine propeller
- Motor power - reducer 0.18 Kw. Voltage 220/380 III.
- Temperature regulation by pt100 probe

3) SARONG SG6 / S MACHINE
For the closed and coding of the alveoli filled by the SG6 / R machine.
Machine for welding the preformed alveolus mouth after dosing.
- The machine uses the rolls coming from SG6 / R.
- It has a production of up to 7,000 suppositories.
- You can make strips of 3-4-5-6 and more suppositories with a simple regulator.
- Each strip of suppositories can be coded.
- The welding temperature can be regulated by means of a temperature regulator
       high accuracy.
- Motor power: 0.5 HP. Voltage 220/380 III.
- Welding resistors: 700 Watt. 220V
- Approximate measurements: 1,800 x 700 mm. x 700 mm High.
- Approximate weight: 180 Kg.

This equipment is located in ES