-
Machinery
Choose from 20,028 used machinery listings
- Auctions
- Sell machines
- Sell complete plants
- What is Kitmondo?
- About us
- Blog
SEMITOOL SPRAY SOLVENT TOOL (SST) consisting of:
- Model: SST-C-742-280K
- Class 1 SST
- Automated Spray Solvent Tool (SST)
- Process Applications: Polymer Removal, Resist Stripping, Wafer Cleaning, Metal Lift-Off
- Batch Solvent Processor for Wafer Cleaning
- Max wafer size: 8/200mm Wafers
- Dual Chamber (for single 25 Wafer Cassette)
- 2 Rotor included (select size at time of order)
- 7 Stainless Steel Tanks (4 Heated & 3 Ambient)
- Front Touch Screen
- Semitool 302 Controller
- Fume Detection
- Fire Suppression System
- Operators Manual
- Available for Full Inspection and Demonstration at ClassOne!
CLASSONE''S SEMITOOL SPRAY SOLVENT TOOL (SST) REFURBISHMENT PROCESS consists of:
- Bowls sent out for electro-polishing as needed.
- NEW Tank O-rings installed (ClassOne standard).
- NEW Door Seals installed (ClassOne standard).
- NEW Rear Bowl Seals installed (ClassOne standard).
- NEW Vibration Isolators installed (ClassOne standard).
- NEW N2 Filters installed (ClassOne standard).
- Upgrade Option: NEW Chemical Filters (various filter sizes can be installed but must be requested).
- Front User Interfaces (F.U.I.s) are inspected and serviced or replaced as needed.
- All Nozzles are inspected visually, tested for spray pattern and replaced as needed.
- Nozzles are clocked to 40 degrees (other configurations completed upon request).
- Rotor Stop Positioners are inspected and service or replaced as needed.
- Drain Box Manifolds are disassembled, inspected and serviced as needed.
- Chemical Pumps are disassembled, inspected and serviced as needed.
- EMO Button(s) and Circuit(s) are tested.
- Door Windows are replaced as needed.
- Door Up / Down movements and drives are serviced or replaced as needed.
- Delivery lines are repaired or replaced as needed.
- Pneumatic lines are repaired or replaced as needed.
- Wiring is repaired or replaced as needed.
- System Leveling Feet are replaced as needed.
- System Wheels are replaced as needed.
- During Quality Assurance testing the system is run to verify RPM regulation and stability under normal operation.
- During Quality Assurance testing the system is run to verify without excessive vibration normal operation.
- During Quality Assurance testing the system is run to verify that the valves both operate properly and do not leak by under normal operation.
This equipment is located in US
Manufacturer | Semitool |
Model | Spray Solvent T |
Year | - |
Country | USA |
Condition | Good |
Main category | PCB and SMT equipment |
Subcategory | Other Semi Tools |
ID | P50908070 |
Client type | Machinery dealer |
On Kitmondo since | 2011 |
Number of listings | 0 |
Country | USA |
Last activity | Aug. 25, 2023 |