Listings similar to "SIDEL SBO 10/14" 60

PET Blow molding Machine - Year 2021, 7000 bottles/hr, 6 cavity. 20 Cavity Filling Machine - Year 2021 never used. Brand New. Small Capping and Lab…

Sidel Model SBO 4 PET Reheat Stretch Blow Molding Machine Date of manufacture- 2002 Series 2 machine Number of cavities- 4 Maximum production ra…

Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine Year of manufacture- 2020 Nu…

Number of cavities – 18 Nominal production capacity- 36,000 bottles per hour Wheel is Universal model, oven is a Matrix mode Type change parts cur…

Bekum Model H-155 Continuous Extrusion Blow Molding Machine Extruder diameter- 90 mm Mold width- 420 mm Mold length- 320 mm Mold depth-…

4 Total Machines available (2 in February 2024 and 2 in April 2024) 14 Cavity Blowmolder last running .5L PET Bottled Water and Carbonated Soft Drin…

Hersteller | manufacturer: Bekum Maschinentyp | machine type: BM 504 Stationen | stations: Einstation | Single station Baujahr | built: 1998…

Hersteller | Manufacturer: Uniloy Maschinentyp | Machine type: BWF 16 E Stationen | Stations: Einstation | Single station Baujahr | Built: …

Aoki Model SBIII-500N-60 PET Injection Stretch Blow Molding Machine – (2) available – PET One-Step – Year of manufacture- 2003 – Injection capaci…

2008 Sidel Model SBO 34 Universal PET Reheat Stretch Blow Molding Machine – Universal version – Number of cavities- 34 – Nominal production capac…

2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine Series 2 machine Number of cavities- 4 Maximum speed- approxi…

SIG Corpoplast Model Blomax 14 PET Reheat Stretch Blow Molding Machine Machine is a Series III Operating speed- approximately 22,500 per hour…

Sidel Model SBO 2F PET Reheat Stretch Blow Molding Machine Number of cavities- 2 Nominal production capacity- 2,400 bottles per hour Type m…

Bekum Model BM-406D Continuous Extrusion Blow Molding Machine Year of manufacture- 2006 Line was reported to have averaged approximately 11,250…

Manufacture | Hersteller: Bekum Machine type | Maschinentyp: BA15/E Station | Stationen: Single station | Einstation Construction year | Bau…

Description Rocheleau Model RS-25 (8) Head Reciprocating Screw Blow Molding Machine – Year of manufacture- 2003 – Serial number- RS25-03-40 …

Sidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine Year of manufacture- 2000 Number of cavities- 2 Nominal production capacity- 2,400 b…

Brand Akei Model 70SN-TS-DH-PVC Year of Mfg 2004 Platen Automatic Dual Take Out / Trim Shuttle with auto dome trim take out …

New controls are needed to be put on the machine, it will be completely overhauled Extruder Nutbuchsenextruder / 100/24D parison head AKZ4 (New…

Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine Number of cavities- 4 Current production- (1) gallon bottles- approximately 1.775 bott…

PET blower SIDEL SBO 6 Series 2 - Year: 2001 - Working hours: approx ~ 40,000 only (very little actual use) - Current capacity: 7,800 bph at 1…

- Manufacturer: Bekum - Machine type: BA 34.2 - Stations: Einzelstation/ Singlestation - Built: 2001 - Control system: Neue Steuerung/ New contro…

Used Uniloy reciprocating screw 2-head Blow Molder. Model R2000-100-2, Serial #N01A0100072, new 2005. Dual heads are on 24″ centers with approximatel…

Description Uniloy Model 350 R4 (3) Head Blow Molding Machine – Head configuration- (3) heads with 14 1/2” center to center distances between …

Description Sidel Model SBO 1 PET Stretch Blow Molding Machine – Year of manufacture- 2000 – Number of cavities- 1 -Production capacity- …

Uniloy Model R2000 (3) Head Reciprocating Screw Blow Molding Machine (Complete Line) – Year of manufacture- 2001 – Head configuration- 3 heads with…

Description Sidel Model SBO 28 (series 2) PET Stretch Blow Molding Machine – Series 2 machine – Number of cavities- 28 – Approximate outp…

Used Sidel model SB016 PET stretch blow molder, new 1996. Still installed as operated and reported in excellent condition, retro fitted for quick cha…

Description 2005 Bekum Model BM-705D Co-Ex Continuous Extrusion Blow Molding Machine – Can make a (3) layer container – Extruder diameters – (…

Description Uniloy Model 2011 (3) Head Blow Molding Machine – Head configuration- 3 heads with 6 1/8″” center to center distances between he…