Listings similar to "Sidel SBO 8 series 2" 60

Sidel Model SBO 4 PET Reheat Stretch Blow Molding Machine Date of manufacture- 2002 Series 2 machine Number of cavities- 4 Maximum production ra…

Number of cavities – 18 Nominal production capacity- 36,000 bottles per hour Wheel is Universal model, oven is a Matrix mode Type change parts cur…

Sidel Model Combi BD EvoBLOW SBO 18 Matrix PET Reheat Stretch Blow Molding Machine and Sidel EVODECO Labeling Machine Year of manufacture- 2020 Nu…

Bekum Model H-155 Continuous Extrusion Blow Molding Machine Extruder diameter- 90 mm Mold width- 420 mm Mold length- 320 mm Mold depth-…

4 Total Machines available (2 in February 2024 and 2 in April 2024) 14 Cavity Blowmolder last running .5L PET Bottled Water and Carbonated Soft Drin…

Hersteller | manufacturer: Bekum Maschinentyp | machine type: BM 504 Stationen | stations: Einstation | Single station Baujahr | built: 1998…

SIG Corpoplast Model Blomax 14 PET Reheat Stretch Blow Molding Machine Machine is a Series III Operating speed- approximately 22,500 per hour…

2008 Sidel Model SBO 34 Universal PET Reheat Stretch Blow Molding Machine – Universal version – Number of cavities- 34 – Nominal production capac…

Aoki Model SBIII-500N-60 PET Injection Stretch Blow Molding Machine – (2) available – PET One-Step – Year of manufacture- 2003 – Injection capaci…

Hersteller | Manufacturer: Uniloy Maschinentyp | Machine type: BWF 16 E Stationen | Stations: Einstation | Single station Baujahr | Built: …

2002 Sidel Model SBO 4-WP (4) Cavity PET Re-heat Stretch Blow Molding Machine Series 2 machine Number of cavities- 4 Maximum speed- approxi…

Sidel Model SBO 2/3 PET Reheat Stretch Blow Molding Machine Year of manufacture- 2000 Number of cavities- 2 Nominal production capacity- 2,400 b…

Sidel Model SBO 2F PET Reheat Stretch Blow Molding Machine Number of cavities- 2 Nominal production capacity- 2,400 bottles per hour Type m…

Description Rocheleau Model RS-25 (8) Head Reciprocating Screw Blow Molding Machine – Year of manufacture- 2003 – Serial number- RS25-03-40 …

Manufacture | Hersteller: Bekum Machine type | Maschinentyp: BA15/E Station | Stationen: Single station | Einstation Construction year | Bau…

Brand Akei Model 70SN-TS-DH-PVC Year of Mfg 2004 Platen Automatic Dual Take Out / Trim Shuttle with auto dome trim take out …

New controls are needed to be put on the machine, it will be completely overhauled Extruder Nutbuchsenextruder / 100/24D parison head AKZ4 (New…

Sidel Model SBO4R6 PET Reheat Stretch Blow Molding Machine Number of cavities- 4 Current production- (1) gallon bottles- approximately 1.775 bott…

- Manufacturer: Bekum - Machine type: BA 34.2 - Stations: Einzelstation/ Singlestation - Built: 2001 - Control system: Neue Steuerung/ New contro…

Graham Engineering Model GEC15DP7440 Dual 15 Pound Accumulator Head Blow Molding Machine – Year of manufacture- 2000 – Head configuration- dual 1…

PET blower SIDEL SBO 6 Series 2 - Year: 2001 - Working hours: approx ~ 40,000 only (very little actual use) - Current capacity: 7,800 bph at 1…

Brand : Arburg Year : 2001 Type : 270C-300-100 Clamping force : 30 T Screw diameter : 25 mm Between tie bar : 270 x 270 mm Shot vol…

Description Sidel Model SBO 28 (series 2) PET Stretch Blow Molding Machine – Series 2 machine – Number of cavities- 28 – Approximate outp…

Used Sidel model SB016 PET stretch blow molder, new 1996. Still installed as operated and reported in excellent condition, retro fitted for quick cha…

Description Sidel Model SBO 1 PET Stretch Blow Molding Machine – Year of manufacture- 2000 – Number of cavities- 1 -Production capacity- …

Uniloy Model 122-3 Injection Blow Molding Machine – Year of manufacture- 2000 – Clamp force- total- 122 tons – Clamp force- blow side- 1…

Uniloy Model R2000 (3) Head Reciprocating Screw Blow Molding Machine (Complete Line) – Year of manufacture- 2001 – Head configuration- 3 heads with…

PET bottle blow molding machine, with a production capacity of up to 4000 bottles/h (depending on the format). For formats between 0.25 liters up to…

Brand : Billion Year : 2001 Type : H260/470-200 Clamping force : 200 T Screw diameter : 38-45 mm Between tie bar : 610 x 610 mm Sho…

Sidel Model SBO 20 PET Stretch Blow Molding Machine Series II machine Number of cavities- 20 Nominal capacity of machine- 30,000 per hour (1,500 p…