Listings similar to "Sumitomo SE 50 D" 60

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thic…

Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould …

Tie Bar Distance :630×630mm Screw Diameter :60mm Theoretical injection capacity : 679㎝3 Injection mass :624g Maximum injection pressure: 150Mpa …

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Ca…

Tie Bar Distance :410×410mm Screw Diameter :40mm Theoretical injection capacity : 176㎝3 Injection mass :160g Maximum injection pressure: 157Mpa …

Tie Bar Distance :260×260mm Screw Diameter :18mm Theoretical injection capacity : 18㎝3 Maximum injection pressure: 235.2Mpa Injection Rate : 76cm…

Screw D50 / 475 cm3 / 1977 bar. Between columns 510 x 510 / trays 770 x 770. Mold thickness min 210 / max 630. Stroke Mobile plate 550 / ejector 1…

Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 45 Max Shot Weight (PS) (g): 245 Control System: MC4 Lead Time: Immediate In Production: Ye…

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 m…

Mould opening/closing, injection, ejection, etc. are fine and smooth. There is backflow as a problem. It is not known whether it is possible to r…

Injection Unit C110 Screw Diameter 25 mm Shot Size 1.7 oz Max Injection Pressure 30,780 Tie Bar Spacing 14.17" x 16.14" Mold Open Stro…

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Cl…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Horizontal Injection Mold (81028) Manufactured 2011 Specifications Features Shot Size: 8.7 oz. Tie Bar Spacing: 22.05" x 20.08" Platen Size: …

Machine revised by BOY technicians and plugged Can be inspected running Clamping force 550 kN Mould closing force 24.4 kN Maximum plate distan…

Horizontal Injection Mold (81029) Manufactured 2006 Specifications Features Shot Size: 30.2 oz Tie Bar Spacing: 26.97" x 25" Platen Size: 37.…

SANDRETTO serie 8 612/95 Clamping force : 95 T Distance between tie bar : 370 x 370 mm Mould thickness min / max : 100 - 460 mm Opening strocke :…

INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 182 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: cm³/s Pressure o…

Type: KM 300-1400 C1 Producer: Krauss Maffei Made in: 2001 Characteristic: Hours on: 70.000 h Clamping force: 300 t Screw diameter: 60 mm I…

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total pro…

Brand FERROMATIK MILACRON Type EE 230-970 All-electric Year of manufacture 2008 Clamping unit clamping force 230 ton opening stroke 600 mm B…

model 170ht720, 14.7 oz (417 grams), man. in 05/2001, pathfinder 3000 controls, 20" x 20" (508 mm x 508 mm) tie bar spacing, 29" x 29" (737 mm x 737 …

Closing force: 1800 Kn Opening travel: 450 mm Mold min / max thickness: 200/550 mm Distance between the plates: 1000 mm Mold holder plate (LxH): …

Brand FERROMATIK MILACRON Type EE 230-970 All-electric Year of manufacture 2007 Clamping unit Clamping force 230 ton opening stroke 600 mm B…

Year: 2003 Operating hours: 56,891 h Screw: HVF 22 mm Injection pressure: 1890 bar Stroke volume: 123 ccm Clamping force: 60 t tie bar sp…

BILLION 430T INJECTION PRESS The machine is located in France. this extra information is standard for this model. Please always double-check the…

Used 308 Ton Sumitomo SH280C Injection Molding Machine Brand Sumitomo Model SH280C Year of Mfg 2002 Tonnage 308 Shot Size 32.9 oz Tie Bar Spa…

Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - Best …

Type: IS 220 GN Producer: TOSHIBA Made in: 2002 Characteristic: Total hours: 756 Total number of shots: 5.767.094 Clamping force: 2150 kN S…

Used 242 Ton Sumitomo SH220C Injection Molding Machine Brand Sumitomo Model SH220C Year of Mfg 2001 Tonnage 242 Shot Size 23.8 oz Tie Bar Spa…