TANDBERG MPEG2 DVB Professional Multi-Channel Decoder


Last availability: unknown - check availability

Listing description

Cable Head-Ends

The TT1100 architecture is flexible allowing the extensive range of option modules to be combined with MPEG decoding to provide powerful solutions for professional broadcast applications. It is ideal for cable head-ends worldwide due to it’s support of PAL/NTSC video standards and of all major DVB CA systems.

Used extensively in the satellite (QPSK) to PAL/NTSC analogue cable market the flexible architecture enables this product to be readily extended into applications such as Telco, DVB-C and DVB-T MPEG distribution. Adding the optional SDI output and/or transport stream monitoring module provides a powerful monitoring capability.

Radio Applications

With the capability of receiving up to 30 radio channels from a wide range of input interfaces, the TT1100 is ideal for receiving and decoding a large number of Radio stations.

Telecom Contribution & Distribution

The TT1100 is highly cost effective solution for an operator in the contribution and distribution market with all the major Telco interfaces available as integrated options.

1 x MMI 1100 Module
1 x Tuner/Demod 8300 16-30,5Mb Module
4 x Demux Smartcard Modules
4 x TV DEC 3500 Modules
1 x 200-240v Kettle Power Supply PAL 50/60Hz

The TT1100 is the TANDBERG Multi-Channel Decoder for operations of analog and digital networks. The product can receive and decode MPEG- 2 signals from a wide range of frontend interfaces and Conditional Access systems. Unlike other products the TT1100 can process up to 7 services simultaneously.

The TT1100 is designed for professional decoding and monitoring applications such as Distribution, DVB-C, DVB-S & DVB-T.

TECHNICAL SPECIFICATION

INPUT OPTIONS:

DVB ASI Connector: BNC (female)
DVB Parallel / SPI / LVDS Connector: 25-pin D-type
QPSK Demodulator Connector: F-type (female), 75 ohm
Frequency range: 950 – 2150MHz
Symbol rates: 2 – 30.5 Msym/s
LNC power: 13V, 18V or off
22KHz tone
QAM Demodulator Connector: F-type (female), 75 ohm
Channel Bandwidth: 8MHz
Tuner frequency range: 50 – 860MHz
TANDBERG Television Proprietary G.703 interface: Connector: BNC (female)
G.703 compliant PDH bit-rates: 2, 6, 8, 34, and 45Mbit/s
ATM/SDH input interfaces Connector: BNC (female)
G.703 compliant PDH (AAL-1) bit-rates: 34 a nd 45 Mbit/s
(AAL-5) 155Mbit/s electrical or optical SM/MM
(AAL-1) 155Mbit/s electrical or optical SM/MM

OUTPUTS:

Analogue video output – Composite PAL/NTSC
Digital video output, CCIR Rec, 601 (option)
Analogue audio output
Digital audio output AES/EBU (option)
Asynchronous RS-232 data output with data rates
up to 38.4kbaud/s
DVB ASI output (option)
Connectors: 2 x BNC (female)
Connectors: 2 x BNC (female)
Connectors: Mini XLR, balanced (male)
Connectors: 2 x BNC (female)
Connector: 9-pin D-type
Connector: BNC (female)

FEATURES:

Decoding of up to 6 TV channels (7 with ASI i/p)
Automatic selection of PAL/NTSC
Complete DVB PSI/SI processing
PSI/SI disable for non-DVB signal handling
ATSC service selection
Flexible VBI handling
Transcoding of DVB teletext, reinserted in PAL
output (VBI)
Wide Screen Signalling (WSS) and Video
Programming System (VPS)
Test Signal (VITS) generation
Closed Captioning (NTSC)
Teletext subtitling
Auto selection of language for audio, subtitling and
teletext
Flexible CA handling
Conax
Irdeto
Mediaguard
Nagravision
Viaccess
Fixed Key scrambling
Signal protection
Software and hardware upgradable on site
Configurable alarm relay
TS Monitoring Module – (TT4005) option
CONTROL:

Front panel keypad and LCD
Ethernet SNMP Remote Control (option)
TANDBERG Device Controller (TDC) (option)
PHYSICAL AND POWER:

Input voltage: 184 – 264 Vac or 90 –132 VAC (strap selectable) or –48 VDC (optional)
Cooling: Convection
Dimensions: (W x D x H) 483 x 350 x 132.5mm (19” x 13.7” x 3RU)
ENVIRONMENTAL CONDITIONS:

Temperature: In use: 0°C to +45°C Storage: -20°C to +70°C
Relative humidity: 5 – 95%

COMPLIANCE:

CE marked in accordance with Low Voltage Directive (LVD) 73/23/EEC and EMC directive 89/336/EEC

Technical Details
TECHNICAL SPECIFICATION

INPUT OPTIONS:

DVB ASI Connector: BNC (female)
DVB Parallel / SPI / LVDS Connector: 25-pin D-type
QPSK Demodulator Connector: F-type (female), 75 ohm
Frequency range: 950 – 2150MHz
Symbol rates: 2 – 30.5 Msym/s
LNC power: 13V, 18V or off
22KHz tone
QAM Demodulator Connector: F-type (female), 75 ohm
Channel Bandwidth: 8MHz
Tuner frequency range: 50 – 860MHz
TANDBERG Television Proprietary G.703 interface: Connector: BNC (female)
G.703 compliant PDH bit-rates: 2, 6, 8, 34, and 45Mbit/s
ATM/SDH input interfaces Connector: BNC (female)
G.703 compliant PDH (AAL-1) bit-rates: 34 a nd 45 Mbit/s
(AAL-5) 155Mbit/s electrical or optical SM/MM
(AAL-1) 155Mbit/s electrical or optical SM/MM

OUTPUTS:

Analogue video output – Composite PAL/NTSC
Digital video output, CCIR Rec, 601 (option)
Analogue audio output
Digital audio output AES/EBU (option)
Asynchronous RS-232 data output with data rates
up to 38.4kbaud/s
DVB ASI output (option)
Connectors: 2 x BNC (female)
Connectors: 2 x BNC (female)
Connectors: Mini XLR, balanced (male)
Connectors: 2 x BNC (female)
Connector: 9-pin D-type
Connector: BNC (female)

FEATURES:

Decoding of up to 6 TV channels (7 with ASI i/p)
Automatic selection of PAL/NTSC
Complete DVB PSI/SI processing
PSI/SI disable for non-DVB signal handling
ATSC service selection
Flexible VBI handling
Transcoding of DVB teletext, reinserted in PAL
output (VBI)
Wide Screen Signalling (WSS) and Video
Programming System (VPS)
Test Signal (VITS) generation
Closed Captioning (NTSC)
Teletext subtitling
Auto selection of language for audio, subtitling and
teletext
Flexible CA handling
Conax
Irdeto
Mediaguard
Nagravision
Viaccess
Fixed Key scrambling
Signal protection
Software and hardware upgradable on site
Configurable alarm relay
TS Monitoring Module – (TT4005) option
CONTROL:

Front panel keypad and LCD
Ethernet SNMP Remote Control (option)
TANDBERG Device Controller (TDC) (option)
PHYSICAL AND POWER:

Input voltage: 184 – 264 Vac or 90 –132 VAC (strap selectable) or –48 VDC (optional)
Cooling: Convection
Dimensions: (W x D x H) 483 x 350 x 132.5mm (19” x 13.7” x 3RU)
ENVIRONMENTAL CONDITIONS:

Temperature: In use: 0°C to +45°C Storage: -20°C to +70°C
Relative humidity: 5 – 95%

COMPLIANCE:

CE marked in accordance with Low Voltage Directive (LVD) 73/23/EEC and EMC directive 89/336/EEC


Last availability: unknown - check availability

Listing information

Manufacturer Tandberg
Model TT1100
Year -
Country UAE UAE
Condition Excellent
Main category Broadcast, Film and Audio
Subcategory Other Broadcast Equipment, Film & Audio
ID P90925052

Last availability: unknown - check availability

About the seller

Client type Machinery dealer
On Kitmondo since 2017
Number of listings 259
Country UAE UAE
Employees 1 - 10
Established 2016
Company description

UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used... read more

UAE’s only one-stop shop for used and refurbished broadcasting equipment. Home to the only inventory of used, refurbished and demo equipment in the Middle East, we buy and sell high-quality used broadcast and AV equipment to radio and TV customers primarily in the Gulf as well as other parts of the word.

We source our equipment from premier broadcasters in the region and employ an efficient team of engineers to refurbish and service the gear we have acquired before selling them. All used broadcast equipment comes with a three-month warranty.

We have successfully provided integrated solutions and equipment to end users in U.AE, Egypt, India, Jordan, Pakistan, Afghanistan, the Philippines and Turkey.

Having established a firm foothold in the Middle East and Asia, BSBroadcast is constantly looking to extend its portfolio of equipment and solutions through partnerships with leading European and American used equipment dealers

The Ceo, who has worked in MENA region to build broadcast facilities from scratch, established BS Broadcast in 2016. On this journey, the CEO identified a need among customers for revamped and restored equipment at lower costs. Additionally, he has been active in the Middle East and South Asian broadcasting industry since 1999 and has developed a vast network of contacts that came with requirements for used equipment.

In essence, the company was born out of these demands and presently serves customers worldwide. Having a base in the UAE has helped facilitate easy shipment across the globe.

Our inventory includes an extensive range of 3G/HD/SD equipment including playout servers, satellite antennae and terminals, RF modulators, frequency converters, multiplexers, HPA, SPG, waveform monitors, up-converters, routers and switchers, and more from the world’s leading manufacturers.

Whether rotating out your existing equipment, or clearing out your storage area, bsbroadcast.com can assist you in securing maximum value for your investments. Should you want a quote for your used systems cameras, broadcast lenses, mixers or SR decks, please contact our trade sales team.

Last activity Jan. 10, 2020
Contact Click here