TECNO FLUSS MOD. MRT-10 - Cream filling and capping line with labeler used

Listing description

DESCRIPTION:
20 station filling and capping line with labeling machine. Dosing and capping machine for liquid-dense-creamy products.

SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.

MAIN FEATURES:
From the conveyor the bottles enter the transport star and with alternating movement controlled by rotoblock enter the dosing station. The feeding of the cap or under cap takes place via a vibratory feeder. The cap from the insertion station is placed on the bottle. Once the cap is positioned in the next station, the screwing takes place with a magnetic friction head. The next station provides for the control of the cap presence with automatic rejection of the defective bottles without stopping the machine. The electrical equipment is controlled by PLC with inverter on all motors. The filled bottle is transported by a belt to the exit.
The format installed on the machine is for 10 ml bottles, with 25 mm diameter a 26 mm capping head.

The line consists of the following groups: rotating table for loading containers at the entrance, rotating star with 20 stations, screwing unit, vibratory feeder for caps – 3 Master, product doser, labeller, rotating unloading table at the exit

Additional formats available with the machine:
-Diam. 55mm, 150ml
-Diam. 45mm, 50ml
-Diam. 35mm, 30ml
-Diam. 50mm 200ml
-Diam. 55mm 250ml
-Diam. 30mm

Change parts available:
Capping head: Diam. 20 mm, 28 mm, 30 mm, 34 mm
Starwheel for bottle movement: Diam. 26 mm, 29 mm, 35 mm, 44 mm, 48 mm, 54 mm, 57 mm
Chute for caps: Diam. 22 mm, 30 mm, 37 mm
Vibratory cap feeder: Diam. 30 mm

Year of construction: 2003

TECHNICAL DATA
Length mm 4600
Width mm 2100
Height mm 1920
Net weight Kg 1500
Frequency Hz 50
Voltage Volt 200

This equipment is located in IT