Used Assembleon Opal-XII

Listing description

Assembleon Opal-XII in excellent condition.
vintage: 2006

Features:
• On the fly alignment using a vision system with a Line Array Camera standard equipped with a side illumination unit for BGA’s, µBGA, CSP components.
• Placement beam with 4 Super Fine heads.
• Simultaneous picking is possible by all 4 heads from any mix of tape feeders (except for 0201 components). This allows a much higher nominal placement rate and board throughput.
• Complete component range can be handled with only 6 nozzles shapes.
• Fiducial alignment camera with improved software controlled illumination unit (white + IR Leds), that also can be used as teaching/tracing device and for Bad Mark sensing.
• Automatic width adjustment. The PCB dimension is included in your PCB data.
• PCB pin-positioning. Second pin is easily adjustable for fast changeover.
• PCB push up plate (Z servo controlled )with 12 push up pins, for PCB support. PCB thickness is included in the PCB data.
• Substopper, allowing a second PCB to enter the machine for reducing transport time.
• Exit Substopper, allowing a new PCB to enter the work area of the machine while the downstream machine is still not ready to accept a new PCB.
• 3.5" FDD for backup purposes.
• CD-ROM drive for software installation
• Operation panel with push buttons
• Component dump box.
• CE safety.
• ESD safety.
• Electrical and Mechanical SMEMA.

For more detailed specifications please refer to pictures 2 and 3

Please do not hesitate to contact us for any further information.

Specification Description
Disclaimer Pictures of machines are for demonstration purposes only,
The actual appearance of the machine may differ.
Feel free to ask for a recent picture of the machine in question,
Or drop by at our showroom for a demonstration.

This equipment is located in NL