Used Burkle Model ODW 2240/140 Short-Cycle Through Feed Press Line

Listing description

For Laminating Chipboards or MDF Boards With Veneer and Balance Paper
Workpiece Dimensions:
Min Length: 350mm (13.75")
Max Length: 2440mm (96")
Min. Width 350mm (13.75")
Max. Width: 2100mm (82.5")
GLUE SPREADER
For Single or Double-Sided Application of Glue onto Flat Boards
Maximum Working Width 2200mm (86.5")
Two(2) Rubber Covered Applying Rollers 70 Shore Hardness with 20 Grooves Per Inch
Two(2) Hard Rubber Covered Doctor Rollers
Maximum Passing Height 100mm (3.9")
Feed Speed 10 - 35 M/Min Frequency Controlled
SPLIT BOARD LAY-UP DEVICE
Disk Roller Transport Track with an Integrated, Displaceable Depositing Rack to Automatically Deposit the Glue Chipboards
The Disk Roller Transport Track is Divided in 2 Driving Sections
The Driving Sections are Frequency-Controlled
COLLECTING AND PRESS LOADING BELT
Synthetic Fabric Belt Provided with a Glue-Rejecting, Non-Skidding and Anti-Static Coating
The Conveyor Belts are Protected Against Running off Center

Total Length Approx 5300mm(208")

Width of Transport 2200mm(86.5")

Hydraulic Short-Cycle Press Model ODW 2240/140

Downstroke Type Press with Hard Chromium-Plated Pistons

Press Heated by Thermal Oil fed by High-Pressure Metal Hoses with Stainless Steel Armoring

Top and Bottom Heating Platens Can be Heated Separately

Dimensions of Heating Platens 2200mm (86.5") X 4000mm (157.5")

Loading Side 2200mm

Total Pressure 10,472 kN

Cylinders, 3 Rows 12 X 200mm Diameter

Hydraulic Operating Pressure 278 bar

Daylight Between Platens 150mm (5.9")

Maximum Operating Temperature 130 Degree Celsius

Weight of Press 43,000 kg (94,600 lbs)STACKING EQUIPMENT

For Automatic Staking of Boards with an Insensitive Surface Against a Stacking Wall

Belt Transport Track Which Lifts and Lowers by a Hydraulic Scissor Lifting Device

HEIZA HEATING UNIT

Heat Exchanger Steam/Themal Oil

Capacity 160,000 kcal/h = 186 kW

Primary Source: Saturated Steam 7.4 bar Excess Pressure (120 psi)

Secondary Source: Heat Transfer Oil 147 / 155 Degrees C

This equipment is located in US