Used DMC Model Unisand 2000US 1350-1M4+US 1230

Listing description

Add To Quote

DMC Unisand 2000 Top & Bottom Planer Sander
Capacity 53" Wide

Four Heads Bottom
29KW (40HP)First Bottom Head Planer 7.08" Dia. Spirial Replacable 4-Sided Carbide Insert Cutterhead with 520 4-sided 14 x 14 x 2mm Throw Away Knives
29KW 40HP) Second Bottom Head Steel Contact Drum Approximately 12.5" Dia.
25.5KW (35HP) Third Bottom Head Rubber Contact Drum Approximately 12.5" Dia.
21.4KW (30HP) Fourth Bottom Head Platen Approximately 3" wide platen. Motor is 2-Speed (9/18 m/sec)
Four Head Top
29KW (40HP) First Top Head Planer 7.08"Dia. Spiral Replaceable 4-Sided Carbide Insert Cutterhead with 520 4-sided 14 x 14 x 2mm Throw Away Knives

29KW (40HP) Second Top Head Steel Contact Drum Approximately 12.5" Dia

25.5KW (35HP) Third Top Head Rubber Contact Drum Approximately 12.5" Dia.

21.4KW (30HP) Fourth Top Head Platen Approximately 3" wide Platen Motor is 2-Speed (9/18m/sec)

5.5KW (7.5HP Variable Speed Feed

Vacuum Beds with the Bottom Head Machine hHaving a 13KW (17HP) Vacuum Motor and the Top Head Machine Having a 9KW (12HP) Vacuum Motor

Abrasive Belt Size; 54" x 103"

Additional Pressure Rolls for Short Pieces

Min. Panel Width 52mm(2")

Max Panel Height 200mm (7.75")

Min Panel Height 8mm (.31")

Dust Outlets: Bottom Machine has the following - (1) 8", (3) 7", (3) 6". Top Machine has the following - (1) 10", (3) 8", (1) 7", (3) 6"

Electrical Requirements: Bottom Machine 222 Amps @ 460V, Top Machine 214 Amps @ 460V

This equipment is located in US