USED DOOSAN PUMA TT2100SYY TURNING CENTER Two spindles, two turrets, and dual y-axis capabilities. 2021 Star

Listing description

DOOSAN PUMA TT2100SYY TURNING CENTER
Two spindles, two turrets, and dual y-axis capabilities. 2021, Never Cut a Part, Zero Cutting Hours

DOOSAN PUMA TT2100SYY TURNING CENTER
Two spindles, two turrets, and dual y-axis capabilities.

SPECIFICATIONS
CAPACITY:
Swing over bed 230 mm (9.05")
Swing over carriage 230 mm (9.05")
Maximum turning diameter (upper turret) 230 mm (9.05")
Maximum turning diameter (lower turret) 230 mm (9.05")
Distance between left and right spindle nose 750 mm (38.58")

MAIN SPINDLE:
Maximum bar capacity 67 mm (2.625")
Recommended chuck size 210 mm (8")
Spindle speed 5,000 rpm
Spindle nose A2-6
Left spindle draw tube ID 68 mm (2.68")
Spindle bore diameter 76 mm (2.99")
AC spindle motor (S3 25% rating) 25 kW (35 hp)
Maximum spindle torque (S3 25% rating) 223 Nm (164 ft-lb)

MAIN SPINDLE C-AXIS:
Minimum programmable angle 0.001 degree
Rapid traverse rate (RPM) 600 rpm
C-axis repeatability ±0.006 degree
C-axis positioning accuracy 0.0167 degree
C-axis braking torque 312.5 Nm (230 ft-lbs)

RIGHT SPINDLE:
A axis travel (right spindle) 730 mm (28.7")
Spindle speed 5,000 rpm
Spindle nose A2-6
Draw tube ID 65 mm (2.56")
Spindle bore diameter 76 mm (2.99")
AC spindle motor S3 60% rating 18 kW (25 hp)
Maximum spindle torque (S3 25% rating) 223 Nm (164 ft-lbs)
Standard chuck size 210 mm (8.0")

C-AXIS – RIGHT SPINDLE:
Minimum programmable angle (degrees) 0.001 deg
Rapid traverse rate 600 rpm
C-axis repeatability ±0.006 deg
C-axis positioning accuracy 0.0167 deg

 
Y-AXIS (Upper & Lower Turret):
Y-axis travel (total) 100 mm (±50mm) (3.93" (±1.96”))
Y-axis travel (above center) 50 mm (1.96")
Y-axis travel (below center) 50 mm (1.96")
Y-axis rapid traverse rate 15 m/min (590 ipm)
Y-axis repeatability ±0.002 mm (±0.00008")
Y-axis feed thrust (continuous) 8,451 N (1,899 lb)
Y-axis feed thrust (intermittent) 11,832 N (2,659 lb)

BED, SADDLE & CROSS SLIDE:
Angle of slant bed 45-degree
X1 axis travel 165 mm (6.5")
Z1 axis travel 700 mm (27.5")
X2 axis travel 165 mm (6.5")
Z2 axis travel 700 mm (27.56")
X axis rapid traverse rate 30 m/min (1,181 ipm)
Z axis rapid traverse rate 40 m/min (1,575 ipm)
X axis ball screw diameter 32 mm (1.26")
Z axis ball screw diameter 32 mm (1.26")
X1 axis feed thrust (continuous) 7,758 N (1,744 lb)
X1 axis feed thrust (intermittent) 10,862 N (2,442 lb)
Z1 axis feed thrust (continuous) 5,634 N (1,266 lb)
Z1 axis feed thrust (intermittent) 7,888 N (1,773 lb)
X2 axis feed thrust (continuous) 7,758 N (1,744 lb)
X2 axis feed thrust (intermittent) 10,862 N (2,441 lb)
Z2 axis feed thrust (continuous) 5,634 N (1,266 lbs)
Z2 axis feed thrust (intermittent) 7,888 N (1,773 lb)
A axis feed thrust (continuous) 5,634 N (1,266 lb)
A axis feed thrust (intermittent) 7,888 N (1,773 lb)
X axis repeatability ±0.002 mm (±0.00008")
Z axis repeatability ±0.003 mm (±0.00012")

TURRETS:
Turret Stations 12 + 12
Turret indexing positions 24 + 24
Tool holder type BMT-55
Turning tool shank size (metric turret 20 mm) .75"
Boring bar diameter (metric turret 32 mm) 1.25"
Turret index time (next station swivel time) 0.15 second
Tool selection Bi-directional
Turret index repeatability ±0.0005 degree

 
ROTARY TOOLS BOTH TURRETS:
Rotating tool RPM 5,000 rpm
Rotating tool spindle motor (5 min rating) 7.5 kW (10 hp)
Rotating tool torque (5 min rating) 47 Nm (34.7 ft-lb)
Rotating tool collet type ER 25
Milling collet capacity 1/8 to 5/8"

COOLANT SYSTEM:
Coolant pump pressure 4.5 bar (65 psi)
Coolant pump motor .75 kW (1.0 hp)
Coolant tank capacity 540 l (142 gal)

HYDRAULIC / LUBRICATION:
Hydraulic tank capacity 37 l (9.7 gal)
Hydraulic oil required* Mobil DTE #24 or Shell Tellus 32
Way lubrication tank capacity 2 l (.5 gal)
Way lubrication oil required* Mobil Vactra #2 or Shell Tonna T68
Way lubrication grease capacity .7 l (.18 gal)
Way lubrication grease required* ISO VG97

* Cross reference these numbers for other brands

GENERAL:
Machine weight 9,500 kg (20,940 lb)
Floor space - length x width 3,880 mm x 2,360 mm (153" x 93")
Floor space - length with hinge belt chip conveyor 4,725 mm (186")
Machine Height 2,250 mm (88.6")
Height from floor to spindle center 1,200 mm (47.25")
Voltage 205-235V/3 ph/60 Hz
Power requirement 69 kVA (181 Amps @ 220 Volts)

Chip Conveyor
Collets for main and sub spindle
all available live tooling and holders

This equipment is located in US