Used ERSA ecoselect 350

Listing description

ERSA Ecoselect 350 06/2006 Semi-Automatic Selective Soldering System

The solder pots are filled with:
1. Sn 63 Pb37 (1269080-00)
2. Sn 96.5 Ag 3.5 (1350857-00)
Dimensions:
Length: 1,350 mm
Width: 2,500 mm
Height: 1,330 mm
Weight: approx. 900 kg / 1,300 kg (with additional soldering module)
Paint: RAL 7035 / 7016

Electrical Data:
Voltage: 5-wire system, 3 x 230/400 V / N / PE
Power tolerance range: +6 %, -10 %
Frequency: 50 or 60 Hz
Power consumption: min. 7.2 - 42 kW
Amperage: max. 18 - 63 A max. fuse rating: 3 x 63 A (tr)

Environmental specification (factory):
Ambient temperature: max. 30 °C
Positioning system: 2- axis (X,Y) servo driven Z -axis, standard pneumatic driven, optional servo driven motor
Positioning speed: 0.1 - 15 m/min
Positioning accuracy: ± 0.25 mm

Flux module:
Type: high-precision spray fluxer
Flux storage tank: 2 l
Flux speed: 0.1 - 2.5 m/min
Spray width (130 µm-nozzle): 3 - 6 mm, second nozzle available as an option

Preheat module:
Type: short-wave heaters
Capacity : max. 10.2 kW; 6 emitters with 1700 W each

Useful dimensions:
350 mm Length / 300 mm Width
Type: bottom side convection
Capacity: max. 3.1 kW;

Useful emission space: 25 cm²
Solder module 1: Capacity: approx. 3,500 W
Solder volume: approx. 130 kg (when using Sn63Pb37) approx. 110 kg (when using SnAg3,8Cu0,7)
Warm-up time: approx. 2 h Solder temperature: max. 300°C Solder nozzle diameter: 4.5 / 6 / 8 /10 mm additional nozzles available on request
Clearance from PCB-edge: min. 3 mm Soldering speed: 0.1 - 1.0 m/min Standard: 1 soldering nozzle Optional: additional nozzles on request

Solder module 2: Additional solder pot with customized nozzle plate to solder all selective soldering joints simultaneously
Working window: 350 x 300 mm
Type: Dip-Module
Soldering nozzle: customized multi-fountain design Solder volume: ca. 350 kg (when using Sn63Pb)
Solder temperature: max. 300°C
Warm-up time: 2.5 hours
Positioning accuracy: ± 0.25 mm

This equipment is located in PL