Used ERSA HotFlow 2/14

Listing description

ERSA HotFlow 2/14 Reflow Oven in good condition.

Specifications:

Dimensions (Basic machine):
Length: 4,840 mm (191")
Width: 1,500 mm (59")
Height: 1,370 - 1,500 mm (54" - 59")
Height (open): 1,890 - 2,010 mm (74" - 79")
Weight: approx. 1,950 kg (4,300 lb) incl. all options

Paint: RAL 7035 / 7016
Conveyor system:
Working width: 50 - 500 mm (2 - 20")
Working width with PCB center support: 50-500 mm (2-20")
Board clearance: +35 / -20 mm (+1.4" / -1")
Conveyor speed: 20 - 200 cm/min (8 - 79")
Conveyor height from floor: 820 - 950 mm (32 - 37")
Pin-and-chain conveyor: 5 mm (0.02“) as standard, 2.85 mm (0.1“) available as an option
Minimum board length: 80 mm (4“)
Process zone:
Process length: 3,440 mm (135")
Heating zone: 2,570 mm (101")
Cooling zone: 870 mm (34")
Infeed zone: 700 mm (28")
Outfeed zone: 700 mm (28")
Process chamber width: 700 mm (28")

Heating system:
Convection: 100%
Gas flow/module: up to 500 m³/h (17,657 ft3 /h) adjustable
Convection modules: 7 top, max. 2 - 7 bottom • Preheating: 5 top / max. 5 bottom (option) • Soldering zone: 2 top / 2 bottom
Nominal rating per module: 3.3 kW

Cooling:
Cooling zone: water recooling
Coolant: water / air

Ambient temperature: 10 - 35°C

Nitrogen option:
Gas injection: in soldering zone
Gas flow: 0 - 30 m³/h (0 - 1,059 ft3 /h)
Pressure control: 6 bar

Safety devices:
• 1 main switch
• 4 Emergency-Stop buttons
• 2 Exhaust monitors
• 1 Two-hand approval system to close the hood
• 1 one fan monitoring per module

Electrical data:
Power: 5-wire system, 3 x 400 V, N, PE
Power tolerance range: + 6 %, - 10 %
Frequency: 50 / 60 Hz
Max. fuse rating: 3 x 125 A
Nominal rating: 33 kW - 59 kW (subject to configuration)
Nominal current: 58 A (subject to configuration)
Reduced rating: 40 kW

Exhaust rating:
Exhaust stacks: 2 stacks, 150 mm (6") diameter each
Exhaust volume per stack: 400 m³/h (14,126 ft3 /h)

Permanent noise level: <64 dB (A)

Disclaimer Pictures of machines are for demonstration purposes only,
The actual appearance of the machine may differ.
Feel free to ask for a recent picture of the machine in question,
Or drop by at our showroom for a demonstration.

This equipment is located in NL