Used Hardinge Super Precision CHNC-III CNC Lathe with Fanuc 18T Control

Listing description

Technical Specifications:

- Voltage: 230v, 3ph, 60 cyc
- Spindle configuration (ansi): a2-5", 16c
- Round collet (thru capacity): 1.625"
- Hang weight w/workingholding device: 75 lbs. (max.)
- Collet closer stroke: 1/2"
- Turning diameter: 8" (max.)
- Threading diameter: 8" (max.)
- Fixture diameter: 9" (max.)
- Ac digital drive system:
- (15 minute ratings used for power and torque specifications)
- (base speed torque ratings 1250 rpm)
- Standard: 10 hp
- Torque rating: 42 ft. Lb.
- Speed range (1 rpm steps): 50 to 5000
- Top plate and tooling:
- Number of tool positions (standard): 8
- Available: 4
- X-axis travel: 4.5" max.
- Z-axis travel: 12.0" max.
- X-axis traverse rate: 400 ipm (max.)
- Z-axis traverse rate: 400 ipm (max.)
- Distance from spindle to top plate face: 12.5" (max)
- Indexing time (station 1 to 8): 2 seconds
- Station to station (unlock, index, relock): 1 second
- Turret indexing repeatability: .000010"
- Axis repeatability (overall): .000050"
- Swing diameter over bed/way cover (max): 14"
- Workpiece diameter x length (max.): 2.75"
- Compressed air requirement: 70 to 90 psi
- Recommended ambient operating:
- Temperature: 32 to 104 deg. F / 0 to 40 deg. C
- Coolant tank:
- Capacity: 30 us gallons
- Coolant flow rate: 6 to 8 gpm
- Approx. Weight: 6,000 lbs.
- Spindle centerline height: 47.375"
- Machine dimensions: 92.75" x 70" x 64.5" high (90" with guard door raised)

This equipment is located in US