Used Heesemann Model HSM-3 53" Three Head Wide Belt Sander

Listing description

Heesemann Model HSM-3 Three Head Wide Belt Sander
Application: Primary Veneer; Secondary Solids and Sealer
The Cross Belt Makes the CLL Perfect for Removing Tape, Cutting Short Fibers that Contribute to Grain Raising and Sanding Panels with "Book-Matched" Veneer
Width Capacity 53"
Head Configuration:
First Head: Cross Sanding Unit with CSD, 17.4 kW Inverter Controlled, 2 - 20 m/sec Belt Speed
Second Head: Longitudinal Sanding with CSD, 17.4 kW Inverter Controlled, 1.8 - 18 m/sec
Third Head: Longitudinal Sanding Unit with CSD, Pressure Belt for Enhanced Finish, 17.4 kW Inverter Controlled, with 2-Direction Belt Run, 1.8 - 9/18 m/sec
Belt Sizes 53" X 103"
Cross Belt: 189 x 6 inches (should be cloth)
Pendulous Press-On Roller at Infeed Including Control of Excessive Workpiece Thickness

Vacuum Bed

Variable Speed Feed 3 to 15 mpm (10 fpm to 49 fpm)

Thickness Adjustment 3 to 160 mm (.118 to 6 inches)

PLC Controller, Touch Screen

CSD Segmented Pad System 21 mm Control Roller Spacing

Pneumatic Abrasive Belt Cleaning on all Heads

Panel Cleaning Brush at Outfeed

Left Hand Controls and Left Hand Belt Access

Weight: 5500 kg (12,100 Lbs)

Utilities: 480V, Total 135 FLA, 80 cfm Air, 3720 cfm Dust, Main Size 14 to 16 inches

NEW IN 2016

This equipment is located in US