Used JUKI GKG GT

Listing description

Status: Good working condition

Model GT

Stencil Frame
Min. size 470*370mm
Max. size 737*737mm

PCB
Min. size 50*50mm
Max. size 510*510mm

PCB Thickness 0.4–6 mm
PCB Weight 5 Kg
PCB Bottom Clearance 23 mm
GAP (snap off) 0 – 20 mm
Conveyor Height 900 ±40 mm
Conveyor Direction L>R, R>L, R>R, L>L (software controlled)
Conveyor Speed max. 1500 mm/s
Transfer method One stage transport rail
I/O Interface SMEMA
PCB Location Support System magnetic pin, support block, and manually adjust the working platform
Clamping System Automatic upper press and flexible edge clamp, vacuum suction
Squeegee Pressure 0.5 – 10 kg
Print Speed 6 – 200 mm/s
Cleaning Type Roller alcohol applicator, dry, wet, vacuum three modes, back and forth cleaning
CCD FOV 8 x 6 mm
Fiducial Alignment auto
Printing Mode Single or double squeegee printing
Squeegee Type Rubber squeegee/steel squeegee (angle 45/55/60)
Vision look up/down system, digit camera, Geometric matching positioning
Machine Performance
Repeat Position Accuracy ±12.5um @6σ，CpK≥2.0
Printing Accuracy ±18um @6σ，CpK≥2.0
Cycle Time < 7.5 sec.
(exclude printing & cleaning time and camera)
Machine Operating Requirements
Air Supply 4 – 6 bar
Power Supply AC, 220 V ± 10%, 50/60 HZ, single phase
Power Consumption 3 kW
Operating Temperature -20℃~+45℃
Operating Humidity 30 – 60 %
Machine Dimensions 1240 x 1560 x 1491 mm (L x W x H)
Operating System Windows XP or higher
Machine Weight approx. 1100 kg

This equipment is located in CN