Used Midwest Automation Door Assembly Line

Listing description

Midwest Automation Door Assembly Line
Complete Line to Automatically Apply Skins to Both Sides of Entry Doors
Top Skin is Manually Loaded into a Midwest Automation Model HGS II 400 Glue Spreader
Upon Exiting Top Skin is automatically transferred to a turning device
The Core is Automatically Lifted from the Stack and Transferred Over the Bottom Skin which has been Manually Loaded into the Glue Spreader
The Core is Lowered Automatically onto the Bottom Skin and the Transfer Unit Returns to the Stack
Top Skin is Now Rotated on Top of the Core
Door is now Automatically Transferred Through the Midwest Automation RP 4000 Continuous Roller Press
The Completed Door can Now be Removed from the Outfeed Roller Conveyor via Overhead Vacuum Lift Unit

Model HGS II 400 Hot Melt Top & Bottom Glue Spreader
With Capacity 51"
Thickness Capacity 3"
Spreading Rollers 9.85" Diameter Rubber 75 Shore

Doctor Rollers 8.26" Diameter Chrome

Electrically Headed Diathermy Fluid with a Temperature Range of 68 - 375 Degrees

Model RP 4000-10 Continuous Roller Press with Ten(10) Upper and Lower Rubber-Coated Roller Sets

Minimum Panel Length 24"

Maximum Panel Thickness 4"

Maximum Panel Width 53"

Feed Speeds 25-100 fpm

Powered Floor Conveyors Included for Core Loading

Also Includes Nordson DuraDrum Bulk Melter (Heated)

Production Rate is One Door Per Minute

This Line is Currently in Operation for Inspection

Additional YouTube video at https://youtu.be/-MhocH7MRwc

This equipment is located in US