Used Remote Multicamera Motorized Vinten Vantage System for 3 Cams with Custom Case- USED

Listing description

In good working condition. Light wear and scuffs from use. Some scratches on the Pelican cases and on the handle of the control system joystick
The Vantage Motorized Pan/Tilt Head from Vinten is a compact, flexible robotic head designed for lighter video cameras. The Vantage head enables shooters to choose the most suitable camera and lens for their production, rather than being restricted to the limits of a single PTZ camera. Since the camera being used with the Vantage can be swapped out as needed, this head can serve to future-proof your PTZ studio setup. The Vantage features continuously variable speed control over pan, tilt, and zoom axes. Weighing just under 5 pounds, it has a payload capacity of 10 pounds, and is compatible with a range of camcorders and servo zooms.

Use the Vantage head with the optional Vinten µVRC Robotic Controller (not included) for smooth, programmed, joystick-controlled moves. Compatible with existing HD-VRC control systems as well, the Vantage sports Serial, Ethernet, LANC, and Genlock interfaces. This head has a pan range of 355°, tilting from +/- 90°, and a pan/tilt speed of 0.2 to 60°/second. For 360° production productions, the Vantage can provide tracking data to interface with VR systems.

The Vantage head’s tally light is a boon for live productions, and its bubble level enables accurate positioning. This pan/tilt head has a low 24W power consumption, suiting it to battery-operated location use. Mount the Vantage to a tripod or other support using its flat base, or combine the head with a 75mm ball adapter (available separately).

Key Features:
– Remote Pan/Tilt at Variable Speeds
– Supports up to 10 Pounds
– Select Camera & Servo Lens Control
– Use with Optional µVRC Controller
– Flat Base Adapts to Optional 75mm Ball
– Serial, Ethernet, LANC & Genlock Control
– 355° Pan, ±90° Tilt
– Tally Light & Bubble Level
– Works with Existing HD-VRC Control
– VR Data Tracking System

Kit Includes:
-2x Pelican iM2975 cases with custom cut foam for components.
– 3x Vantage Heads with AC Power adapters and L-Brackets
– 2x Chrosziel FIZ Digital Motor Kit
– 2x Camera Risers
– 1x Camera Plate with Rail mounts (includes 1/4″-20 and 3/8″-20 Screws
– 1x Vantage Lens Drive
-1x Extra L-Bracket
-3x Vinten Vantage LANC Cables
-1x Maestro 830 All in one PC with key’s mice and network switch
-1x Vinten Vantage Micro VRC Control System

This full kit will be transported in 2 separate Pelican iM2975 cases

This equipment is located in US