Used SAKI BF-3Di-L1 3D Automated Optical Inspection

Listing description

Dimensions 1040 (W) x 1530 (D) x 1500 (H) mm (BF-3Di-L1)
(40.94 W x 60.24 D x 59.06 H in.)

Maintenance Space 1m in front of the machine, 1m in rear of the machine, 1m in side of the machine
Weight Approx. 950 kg (2094.39 lb)
Usage Environment Temperature: 15 to 30 degree C, Humidity: 15 to 80 %RH (Non Condensing), Height above Sea Level under: 0 to 1000 m, Overvoltage Category : (IEC60664-1), Pollution Degree : 2 (IEC60664-1)
Transport Environment Temperature: 15 to 30 degree C, Humidity: 15 to 80 %RH (Non Condensing)
Operating Environment Single phase, 200 to 240V ±10%, 50/60Hz, 700VA
Noise Level 68 dB(A), Operating Condition: Full load, Measuring Method: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC
Air Requirement 0.5 MPa @ ≥ 5 L/min (ANR)

Target PCB
PCB Size
50 (W) x 60 (L) – 460 (W) x 510 (L) mm (BF-3Di-L1)
(1.97 W x 2.36 L to 18.11 W x 20.07 L in.)

PCB Thickness 0.6 to 5.2 mm (0.02 to 0.204 in.) (*2)
PCB Weight 6 kg (13.2 lb) or less (BF-3Di-L1)

Material Glass Epoxy, Paper Phenol, Ceramic
Warpage 2 mm (0.08 in.) or less
PCB Clearance (Top) 40 mm (1.57 in.) (*3)
PCB Clearance (Bottom) 40 mm (1.57 in.)
Fiducial Mark One mark at any corner and another at the opposing corner (total two marks and above)
Transfer Conveyor Height 880 to 965 mm (34.65 to 37.99 in.)
Method Flat belt transfer
Width Adjustment Auto
PCB Setting Clamp at contact-stopper and rail transfer width.
Clamp width is 3 mm-wide (0.12 in.-wide) at each side.
Transfer Direction Left to Right / Right to Left
Machine Origin Front
Detect the Position of the Stopper Sensor Detect the (Rail width) x 0.4 position from front rail

Optical System
Lighting

2D
CoaxialtopLight: Red LED
TopLight: Red LED
SideLight: Blue LED (First Line), Green LED (Second Line), Red LED (Third Line)
LowLight: Red LED

3D
White LED (with the stripe pattern projection function) (*4)

Camera CMOS area camera
Resolution 18 μm
Imaging FOV camera gantry (*5)
FOV Size 36 (W) x 36 (L) mm (1.417 W x 1.417 L in.)
Communication Feature Network I/F Ethernet (1000BASE-T)
Signal Tower Red, Yellow, Green from above
Signal Interface
Upstream Machine READY signal (Dry contact), BUSY signal, OK/NG signal
Downstream Machine READY signal, BUSY signal (Dry contact), OK/NG signal (Dry contact)

This equipment is located in CN