Used Sony HDC-3300 Full HD Slow Motion Camera

Listing description

The HDC-3300R captures full-resolution 1920 x 1080 High Definition images at an amazing three times the normal frame rate.
The CCU connects to the camera via optical fibre with digital data for perfect HD images over runs of up to 2500 metres.

General
Power requirements AC 240 V, 1.4 A max. / DC 12 V, 8.6 A max.

Operation temperature -20°C to +45°C (-4°F to +113°F)

Storage temperatue -20°C to +60°C (-4°F to +140°F)

Mass Approx. 4.8 kg (10 lb 9 oz) (without VF and lens)

Dimensions (W x H x D) 154 x 197 x 348 mm (6 1/8 x 7 7/8 x 13 3/4 inches)

Camera section
Pickup device 3-chip 2/3-inch type CCD

Effective picture elements (H x V) 1920 x 1080

Signal format

1920 x 1080 images: 1080/180i (59.94i), 1080/150i (50i)
1280 x 720 images: 720/180p (59.94p), 720/150p (50p)
Sensitivity F8(1080/180i)/F9(1080/150i) at 2000 lx

Signal-to-noise ratio x1: -56 dB/-64 dB (at NS MAX mode), x3: -52 dB/-60 dB (at NS MAX mode)

Horizontal resolution 1000 TV lines (at centre) at 1080/180i mode

Spectral system F1.4 prism

Built-in filters

ND:, 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4:1/16ND, 5: 1/64ND
CC:, A: CROSS, B: 3200K, C: 4300K, D: 6300K, E: 8000K
Signal inputs
Mic input XLR-3-pin, female (x1)

Audio input CH1: XLR-3-pin, female (x1), MIC or LINE or FRONT MIC selectable / CH2: XLR-3-pin, female (x1), AES/EBU or MIC or LINE selectable

Signal outputs
HD-SDI/SD-SDI output(**) BNC type (x1), HD-SDI or SD-SDI, character on/off selectable

**When the HDC3300 camera is not connected to the HDCU3300 camera : control unit, the HD-SDI output signal is for maintenance : purpose only.

Test output BNC type (x1), VBS (SD) or VF: Y/R/G/B (HD) or HD-sync or SD-sync selectable

Other inputs/outputs
- CCU Optical/electrical multi-connector (x1)
- Intercom XLR-5-pin, female (x2)
- Prompter output: BNC type (x2)
- DC input XLR-4-pin (x1), DC 10.5 to 17 V
- DC output 4-pin (x1), DC 10.5 to 17 V (max. 1.5 A)

Lens 12 pin (x1)
Viewfinder 20 pin (x1)
Earphone Stereo mini-jack (x1)
Return control 6 pin (x1)
Remote 8 pin (x1
Tracker 10 pin (x1)
Crane 12 pin (x1)

This equipment is located in GB