World 6-HI

Listing description

Description FOIL ROLLING MILL PLANT - 6-HI, NON REVSING, 400-700 MM, THICKNESS EXIT: 5 -100 MICRONS

Year 2001
Brand WORLD
Qty. 1 Second-hand foil rolling mill
Mfc. World Co. (Japan) Type
Application Copper foil Width
Thickness Entry 100 – 200 microns Exit
Speed 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control
Hydraulic servo equipment Main motor power 200 kW DC
Slitter line Mfc. IHI Width
Degreasing line Mfc. World Co. Strip width
Treatment line Mfc. Kawasaki Built

Technical specification
1.Copper foil rolling mill Mfc. World(Japan) Built
Type 6-Hi, non reversing mill Material
Hydraulic servo equipment Speed 0-400/800 m/min
Width 400-700mm Coil outer diameter
Coil weight Max. 5 ton Main motor
Thickness Entry
Thickness X-Ray unit AGC System Threading speed 10 m/min.
Coil max. dia. 1100 mm Variable Crown Control
Spool sizes ID 298 OD 330 mm L=900 mm Qty. 10 sets
Electric voltage 440 V, 3 ph., 50 Hz Total power
Rolling force 160 tons hydraulic servo cylinder push up type
Main parts of the rolling mill
Mechanical unit Mill housing 1 lot Universal joint 2 sets Pinion stand 1 unit Pay off reel 1 unit Winder 1 unit Payoff off reel gear box 1 unit Winder gear box 1unit Payoff reel coil car 1 unit Winder coil car 1 unit Roll force hydraulic unit 1 lot Normal hydraulic unit 1 lot
VC (Variable Crown Control) roll hydraulic unit 1 lot Lubrication circulation unit 1 lot Roll coolant tank 1 lot Pump units (roll coolant) 1 lot
Temperature control unit (roll coolant) 1lot Filter unit (roll coolant) 1 lot Oil mist system 1 lot Micronlube unit (for guide roll) 1 lot
Electric control system 1 lot Backup roll 1lot Work roll 1 lot
Electric system Mill motor DC 200 kW, 440 V Pay off reel motor DC 35 kW, 440 V
Winder motor DC 35 kW, 440 V Roll force hydraulic unit AC 7.5 kW, 200 V
Normal hydraulic unit AC 11 kW, 200 V, AC 505 kW, 200 V
VC (Variable Crown Control) roll hydraulic unit AC 7.5 kW, 200 V
Lubrication circulation unit AC 1.5 kW, 200 V
Pump unit (coolant) AC 15 kW, 200 V (2 units), AC 7.5 kW, 200 kW
Oil mist AC 0.75 kW, 200 V
2. Slitter line Mfc. IHI(Japan) Built
Width 150-700 mm Thickness
Foil tension 45 kg/mm², 450 N/mm²
Pay off reel spool dia. ID 150 mm OD 200 mm & ID 290 mm OD 330 mm
Pay off reel coil width 900 mm Pay off reel coil dia.
Pay off reel coil weight 1.5 T Pay off reel tension
Winding spool ID 76.2 mm OD 110 mm & ID 150 mm OD 200 mm
Winding coil dia. max. 550 mm Winding coil weight
Winding tension 4 – 63 kg Line is running from left to right!
Main parts of the slitter Payoff reel 1 lot Guide roll 1 lot Cutter 1 set Winder (including expansion shaft) 1 lot Air system 1 lot Hydraulic system 1 lot Electric control system 1 lot Small hoist 1 lot Clean booth 1 lot
3. Degreasing line Mfc. World Co. Built
Copper foil width 700 mm Foil thickness
This line is for rolled copper foil degreasing line from pay off and winding coil
Foil tension under 45 kg/mm2 (450 N/mm2)
Pay off reel spool size I.D. 290 mm * O.D.330 mm
Pay off reel spool width 900 mm Pay off reel coil diameter
Payoff reel coil weight max. 1500 kg Pay off reel tension
Winding spool I.D. 290 mm * O.D. 330 mm Winding coil dia.
Winding coil weight max 1500 kg Degreasing speed
Winding tension 10-100 kg Power
Air min. 0.4 Mpa (line side) Saturated steam
4. Rolled copper foil surface roughness treatment line
Mfc. Kawasaki(Japan) Built
Width Max. 700 mm Foil thickness
Specification
Coil Rolled copper foils Foil tension
Foil thickness 10-50 µm Coil width
Pay off reel spool size I.D. 290 mm * O.D.330 mm
Pay off reel spool width 900 mm Pay off reel coil diameter
Payoff reel coil weight max. 1500kg Pay off reel tension
Winding spool I.D. 290 mm * O.D. 330 mm
Winding coil diameter max 650 mm Winding coil weight
Surface treatment speed 15 m/min. Winding tension
Power AC 220 V 60 Hz, 3 ph Air
Saturated steam min. 0.5 Mpa (line side) Cooling water
Clean water 0.15 Mpa Pure water
Hydraulic power Max. 7 Mpa Line direction
Line composition
Pay off reel (coil car) 1 lot Front line
Pickled surface chamber 1 lot No.1 Rinse chamber
No.1 surface treatment chamber 1 lot No.2 Rinse chamber
No.2 surface treatment chamber 1 lot No.3 Rinse chamber
No.3 surface treatment chamber 1 lot No.4 Rinse chamber
No.4 surface treatment chamber 1 lot No.5 Rinse chamber
Rust inhibiting system 1 lot No. 1 dry chamber
Chemical conversion treatment system 1lot No. 2 dry chamber
Drawing and manuals

This equipment is located in DE