Listings similar to "XYZ 2-OP" 60

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special …

EQUIPPED WITH: GE/Fanuc CNC Controls 12" 3-Jaw Chuck Removeable Gap - Tool Post D1-6 Camlock Spindle Nose Tailstock CATALOG SPECIFICATIONS: Sp…

EQUIPPED WITH: Harrison GE/Fanuc "Alpha" CNC Controls Removeable Gap 12" 4-Jaw Chuck w/Jaws - 10" 3-Jaw Chuck w/Jaws D1-6 Camlock Spindle Nose …

Maximum Swing: 18" Chuck Size: 8" Turning Diameter: 11.8" Turning Length: 13.8" Bar Capacity: 2" Tailstock Quill Diameter: 3.14" Ta…

Fanuc OTA CNC Control Swing over the bed: 600mm Diameter Swing over the cross slide: 400mm Diameter Z-Axis:1200mm X- Axis: 300mm Chuck to Tail S…

Chuck size 6″ Swing over the bed 21.7" Swing over cross slide 13.8" Maximum turning length 11.8" Bar capacity 1.77" Travel x 8.3" Travel z 13" …

2014 GANESH CYCLONE 32 CS USED 32mm Twin Spindle Non-Guide Bushing Swiss 1.25" cap, 11-live, gang tool, sub spindle, bar loader Equipped with: Edg…

8" 3-Jaw Manual Chuck Hand Wheels Quick Change Tool Post Tailstock Coolant System 3.5" Floppy Disk Interface RS 232 Port Interface Specifica…

Type: L200SY Producer: HYUNDAI WIA Made in: 2014 Characteristic: Control system: FANUC Series 31i Model A Total hours: 11750 h Maximum turni…

CNC Lathes 15" 3 Jaw Hydraulic Chuck Chip Conveyor Tool Eye (not sure if working) Tailstock RS 232 Port Interface Coolant System wi…

Okuma OSP-U10L, 6" Chuck, 1.63" Bar, Parts Catcher, Tailstock, Chip Chuck Size 6" Max Diameter Bar Capacity 1.63" Spindle Motor 15 / 10 HP…

Turning diameter over the cross slide: 420 mm Control: Siemens Sinumerik 3T-4 Distance between centers: 1000 mm Swing over bed: 660 mm x-axis: ap…

2016 Nakamura NTRX-300 CNC Turning Milling Machine Capacity Inch Metric Max Turning Diameter 25.2 640 Max Turning Length 45.3 1150 Distance …

Made in: 1997 Characteristic: Control system: FANUC Series 0-T Maximum-turning length: 535 mm Max. turning diameter: 270 mm Turning diameter…

Excellent Condition 185 Cutting Hours 18" 3-Jaw Pneumatic Chuck 1,400 RPM 12 Station Turret 28.4" Swing 18.11" Turning Diameter 78.74" Distan…

FANUC 0iMF, 43.22.20", 12000 RPM, 30 Tools, 21.5 HP, TSC, Rotary Table, Chip Conveyor X-Axis 43.3" Y-Axis 22" Z-Axis 20.1" Table Size …

8 AVAILABLE! | Y-Axis & Milling | Tailstock | Rear Discharge Chip Conveyor | DMG Mori/Fanuc F-31iA CNC Control | Gantry Automated Loading System M…

Equipped With OSP-P300S-H CNC Control, 41" Max Swing, 131" Between Centers, 24" 2-Jaw Chuck Main Spindle, 20" 3-Jaw Chuck Sub Spindle, 2000 Max RPM…

GMX_200_LINEAR Multifunction spindle lathe 5000 rpm 5-axis milling head 12000 rpm store 90 tool hsk 63 watering center 40 bars filter paper.

Tailstock Chip Conveyor 12" 3 Jaw Hydraulic Chuck RS 232 Port Interface Complete Coolant System with Tank & Pump All Available Tooling All Avai…

Used XYZ VL 555 x 2M, just arrived, The machine comes with a quick change tool post and 3 jaw chuck and is ready for powered demonstration in our Bri…

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

OSP-P300S-H CNC Control, 41" Max Swing, 131" Between Centers, 24" 2-Jaw Chuck Main Spindle, 20" 3-Jaw Chuck Sub Spindle, 2000 Max RPM Main & Sub-Spi…

Fanuc Series i CNC Control, Max Swing 23.6", Max Turning Length 20", Collet Chuck on Main Spindle 4500 RPM, 6" 3-Jaw Chuck on Sub Spindle 6000 RPM, B…

EQUIPPED WITH: 8" 3-Jaw Chuck Okuma OSP7000L CNC Control Live Milling Capabilities 12 Position Upper & 8 Position Lower Turret Chip Conveyor - C…

The machine is in good technical condition, after prior agreement it is possible to test it.

Controller: FANUC 210i-T Year of manufacture: 1999 Diameter allowed above the bed: 400 mm Diameter admitted in gap: 585 mm Diameter allowed on th…

4 jaw self-centering chuck Steady rest 4 way automatic turret Manuals Specifications Manufacturer Unknown Model CL-16402X Year 2010 Condit…

Very good condition - never used industrially. Few operating hours With many accessories Private purchase 2001 new Everything in working order M…

Control Hurco Ultimax Swing over the Cross-slide 415mm Bar Capacity 78mm Chuck Size 250mm Distance Between Centers 695mm Maximum Cutting di…