Z Corporation 650

Listing description

(1) USED Z PRINTE R3D PRINTER MODEL 650 MFG NEW IN 2010

It prints to a resolution of 600 x 540 dpi and has a build size of 25.4 x 38.1 x 20.3.
Printer Dimensions and Type • With top cover closed: 79” wide x 30” deep x 57” high
With top cover open: 79” wide x 30” deep x 75” high
Floor standing model on six casters. Two front casters are lockable.
•
Full color capability; color shell thickness =.025”
(.635 mm)
•
Integrated powder removal and vacuum units.
Printer Weight 750 lbs (340 kg)
Network Connectivity TCP/IP 100/10
Base T
Operating Environment
Ambient Temperatures
Ambient Relative Humidity
• Maximum Temp. Range: 50-80° F (10 - 26.6° C)
• Recommended Temp. Range: 55-75° F (12.7 -
23.9°C)
• Maximum RH Range: 15 - 60%, non-condensing
• Recommended RH Range: 20 - 55%, non-condens

Build Volume 10” x 15” x 8” (254 mm x 381 mm x 203 mm)
1200 cubic inches
build capacity
Build Speed 2-4 layers per minute
Layer Thickness .0035” - .004” (.089 - .102 mm)
Resolution 600 x 540 dpi print resolution
Noise Levels During Printing = 57dB
Emptying Overflow = 66dB
Vacuuming - Cover Open = 72dB
Fine Powder Removal = 72dB
CSA, CE Approval Meets CE certification standards and UL standards.
Power Requirements 100V, ~50-60 Hz, 15 Amp.
115V, ~50-60 Hz, 15 Amp.
230V, ~50-60 Hz, 8 Amp.
Note: Due to high amperage, a dedicated outlet is
strongly recommended.
Materials -
High Performance Composite Zp131 Powder
Zb61 Binder
Z Corp. is always evaluating new materials for use with
your printer. r Print Heads 5 each HP11 (clear, black, cyan, magenta, yellow)
1520 jets total
Liquid Waste System Pull-out tray

This equipment is located in US