Listings similar to "2005 KINWA CL200 CNC LATHE TURNING MACHINE IN MALAYSIA" 60

Manufacturer: Seiger Type: SLZ 850 Year of construction: 2004 Turning diameter over bed: 1000 mm Turning length: 4500 mm Center distance: 4500 m…

Okuma LU300 2MC600 CNC Lathe (2010) Chuck Size: 10" Bar Capacity: 2.4" # Axis: (4 Turning) # Axis: (1 Milling – “C” Axis) Power: 30 hp Max RP…

Made in: 2004 Characteristic: Control system: MAZATROL 640 T Max. turning diameter: 276 mm Turning diameter over bed (max): 300 mm Maximum t…

---MACHINE SPECIFICATION--- X-AXIS STROKE: 200MM Z-AXIS STROKE: 380MM SPINDLE SPEED MAX: 4500 RPM RAPID X-AXIS: 18M/MIN RAPID Z-AXIS: 24M/MIN S…

Swing Over Front Apron 23″ Swing Over Cross Slide 9.…

2004 DAEWOO PUMA 1500SY with Fanuc 18i-TB Control, Sub Spindle, Y axis, INCLUCING: 3 X-Axis & 3 Z Axis Live tools(BMT55), ALL Static tool holders (BM…

2005 Murata MD60 CNC Turning Center 6" Chuck Single Spindle X-Axis: 24M/Min. Z-Axis 24M/Min. Tool Capacity: 10 Tools Spindle Speed: 4500 RPM …

We bought used machine in 2018, we did small repairs. It was regularly maintained . Machine is in perfect working condition.

CNC Lathes Full C Axis Spindle Rotation Live Milling Capability Parts Catcher Chip Conveyor - Belt Type Tool Eye Programmable Hydra…

---MACHINE SPECIFICATION--- CHUCK SIZE 6" X AXIS 24M/MIN. Z AXIS Z-AXIS 24M/MIN. TOOL CAPACITY 10 TOOLS SPINDLE SPEED 4500 RPM LIVE TOOL 4000 R…

Location: Czech Republic Description: The machine is in good technical condition. Technical parameters: Revolving diameter: Across the front cove…

Siemens 820 CNC Control Maximum Swing Over Bed 32” Maximum Turning Diameter 24” Maximum X Axis Travel 15” Maximum Distance Between Centers 40” M…

Technical data Taper in spindle A2-5 Spindle hole 51 mm Turning diameter 300 mm Bar diameter with collet 24 / 36 mm Carriage: Longitu…

* Okuma LU 300M. * Year of manufacture: 2005. * Two turrets. * Upper turret with motorized tools: V12. * Lower turret: V8. * Cutting hours: 4500…

Type: MASTURN MT 54 Producer: MAS Made in: 2003 Characteristic: Control system: Heidenhaim TE 4110 MP Maximum-turning length: 800 mm Max. tu…

Okuma CNC in good condition model LB 25

EQUIPPED WITH: Siemens 840D CNC Control 12(+4) Position VDI 50 Turret w/Live Milling Y-Axis - Hydraulic Tailstock - 15" 3-Jaw Chuck w/Jaws SMW-Au…

The machine is in good technical condition, after prior agreement it is possible to test it. spindle drilling through draw tube 73 mm, feed 250 mm, w…

Type: Compact A35 Producer: Kovosvit Made in: 2005 Characteristic: Control system: Fanuc 16i-TB Total hours: 18658 h Hours on: 10202 h Max…

Manufacturer: Gildemeister Model GDM 90 MC CNC Control: Eltropilot Y.O.M.: 1992 Operating hours: 17.235 Condition Optically-mechanically excelle…

Turning and milling center. The basis of the machine is a uniform bed made of mature gray cast iron, ensuring high rigidity and precision during mach…

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special …

Made in: 2007 Characteristic: Control system: FAGOR Maximum-turning length: 1000 mm Turning diameter over bed (max): 550 mm Turning diameter…

Spindle Hole Diameter 5.3" Bar Capacity, Maximum 4.75" Swing Diameter, Maximum 31.5" Swing Over Saddle, Maximum 19.68" Turning Diamet…

It has been very well serviced and maintained Following spare parts coming with the machine Various boards, contactors and electrical cables -Cont…

---MACHINE SPECIFICATION--- X-AXIS STROKE: 200MM Z-AXIS STROKE: 380MM SPINDLE SPEED MAX: 4500RPM RAPID X-AXIS: 18M/MIN RAPID Z AXIS: 24M/MIN FE…

Specifications: Max. Turning dia o/slide 760 mm dia. Max. Turning diameter 405 mm dia. Turning Length 860 mm Spind…

Controller : FANUC 18-T Number of axis total 2 Number of spindles 1 Number of revolvers 1 Distance between centres 375 mm Swing diameter ov…

Single-spindle lathe 1) machine information Max machining diameter: 16 mm Max processing length: 200 mm Motor power: 3.7 kW Spindle speed: 1…

Fanuc 10T Control Swing Over Bed 20.5″ Maximum Turning Diameter 13.4″ Maximum Turning Length 20.9″ Swing Over Cross Slide 13.8″ Distance Between…